Sony MVS-8000X SystemMVS-7000X System User Manual page 138

1
In the M/E-1 >Key1 menu, select HF3 'Main Mask.'
The Main Mask menu appears.
2
In the <Mask Type> group, select the mask type.
Key Mask: Masks a part of a key.
Bkgd Mask: Masks a part of a background.
3
In the <Mask Source> group, select the mask source.
Box: signal from the dedicated box generator
Pattern: signal from the dedicated pattern generator
4
Set the mask source parameters.
When a box is selected
Knob Parameter Adjustment
1 Top
2 Left
3 Right
4 Bottom
5 Soft
When a pattern is selected
Knob Parameter Adjustment
1 Size
2 Soft
5 Pattern
a) The pattern is the same as a standard wipe. See "Wipe Pattern List"
in Appendix (page 357).
To select the pattern, display the Mask Ptn Select
menu by pressing [Mask Ptn Select] in the Main Mask
menu.
After selecting one of the patterns (standard wipe
patterns 1 to 24) displayed in the Mask Ptn Select
menu, you can adjust the following parameters.
Knob Parameter Adjustment
1 Size
2 Soft
5
To invert the black and white sense of the mask source,
press [Mask Invert], turning it on.
6
When a pattern is selected as the mask source, set the
pattern modifiers as required.
138
Key Adjustments (Menus)
Setting values
–100.00 to
Top position
+100.00
–100.00 to
Left position
+100.00
–100.00 to
Right position
+100.00
–100.00 to
Bottom position
+100.00
Box softness 0.00 to 100.00
Setting values
Pattern size 0.00 to 100.00
Edge softness 0.00 to 100.00
a)
1 to 24
Pattern number
Setting values
Pattern size 0.00 to 100.00
Edge softness 0.00 to 100.00
When turning [Position] on and setting the pattern
position
Knob Parameter Adjustment
1 Position H Horizontal
position
2 Position V Vertical position
a) See page 169.
When turning [Multi] on and replicating the
pattern
Knob Parameter Adjustment
1 H Multi Number of
repetitions of
pattern
horizontally
2 V Multi Number of
repetitions of
pattern vertically
3 Invert Type Replication
layout
a) See page 171.
When turning [Aspect] on and setting the aspect
ratio of the pattern
Knob Parameter Adjustment
1 Aspect Aspect ratio
a) See page 171.
When turning [Angle] on in the <Rotation> group
and setting the angle of the pattern rotation
Knob Parameter Adjustment
1 Angle Pattern angle
a) See page 170.
When turning [Speed] on in the <Rotation> group
and setting the rate of pattern rotation
Knob Parameter Adjustment
1 Speed Rate of pattern
rotation
a) See page 170.
Using the subsidiary mask
For example, to use the subsidiary mask for key 1 on the
M/E-1 bank, use the following procedure.
1
In the M/E-1 >Key1 menu, select HF4 'Sub Mask.'
The Sub Mask menu appears.
Setting values
–200.00 to
a)
+200.00
–200.00 to
a)
+200.00
Setting values
1 to 63
1 to 63
a)
1 to 4
Setting values
–100.00 to
a)
+100.00
Setting values
–100.00 to
a)
+100.00
Setting values
–100.00 to
a)
+100.00