Setting The On-Air Tally; Setting The Transition Rate Display Mode; Making Settings Relating To Effects - Sony MVS-6000 User Manual

– Selection of signal assigned to the auxiliary bus control block key source
bus (either key signal only, or either video signal or key signal selectable)
• Sensitivity: Adjust trackball, joystick and double-click sensitivity, or set the
relationship between the angle of the search dial and the playback speed.
• Macro: Set the macro execution mode.

Setting the On-Air Tally

To set the high tally state reflected on the control panel, use the following
procedure.
1
In the Panel >Operation menu, press [Button Tally].
The Button Tally menu appears.
2
In the <Tally Type> group, select either of the following.
[R1] to [R8]: Reflect any of tally groups 1 to 8 as the tally state.
Independent: Reflect only the switcher tally state.
3
Press [Execute].
A popup window appears and shows the progress of the operation.

Setting the Transition Rate Display Mode

To determine whether to display transition rate values in menus and on the
control panel in frames or as timecode values, select either of the following in
the <Trans Rate Display> group.
Frame: display in frames.
Timecode: display as timecode (SS:FF).

Making Settings Relating to Effects

To make settings relating to the functions used when carrying out keyframe
effect operations, use the following procedure.
1
In the Panel >Operation menu, press [Effect Mode].
The Effect Mode menu appears.
The status area shows a list of the items with their settings.
Operation Settings (Operation Menu)
113