Table of Contents
Advertisement
a) The range of setting values depends on the DCU port setting. When
the MKS-2700 is connected, select 2 for the slot and a value in the
range 1 to 6 for the port.
3
Press [Port Setting].
The DCU >Serial Port Assign >Extended VTR Setting
menu appears.
At the top of the status area, the relevant serial port,
slot number, protocol, serial port name, and SCU
number appear. In the lower part of the status area, the
response speed settings appear.
4
Using any of the following methods, specify the item
to which the response speed setting applies.
• Press directly on the list in the status area.
• Press the arrow keys to scroll the reverse video
cursor.
• Turn the knob.
Knob Parameter Adjustment
1
Item No
Item selection
a) 1. Maximum Open Delay: maximum time required to open a file
2. Maximum Cueup Delay: maximum time required to cue up a file
3. Play After Cueup Delay: maximum delay time from the cued-up
state to begin playback
4. Stop Delay: delay time from issuing the Stop command until
actually stopping
5
Turn the knob to set the response speed of the
Extended VTR.
Knob Parameter Adjustment
2
Setting
Response speed
setting
6
Press [Set].
7
Repeat steps 4 to 6 as required to make the settings for
other items.
Setting values
a)
1 to 4
Setting values
0 to 255
Serial Port Settings (Serial Port Assign Menu)
651
Advertisement
Table of Contents
