Sony MVS-8000X SystemMVS-7000X System User Manual page 595

a)
Command name
FM Src1 Freeze Off
FM Src2 Frame Freeze
FM Src2 Field Freeze
FM Src2 Freeze Off
SWR GPI Enbl
DME1 GPI Enbl
DME2 GPI Enbl
DME3 GPI Enbl
DME4 GPI Enbl
Panel GPI Enbl
SWR GPI1 Test Fire
|
SWR GPI8 Test Fire
Panel GPI1 Test Fire
|
Panel GPI8 Test Fire
DCU GPI1 Test Fire
|
DCU GPI50 Test Fire
Macro Attachment Enbl
Macro Only Set
Pre Macro
Post Macro
Macro Take
Macro Cancel
Macro Auto Ins
Macro AT with Rate
Macro AT with A/B Bus
Macro TL with Region
DME Override
DME Graphic
Plug-In Editor Enbl
Function
Release freeze of frame memory source 1
Frame freeze of frame memory source 2
Field freeze of frame memory source 2
Release freeze of frame memory source 2
Enable/disable switcher GPI
Enable/disable DME1 GPI
Enable/disable DME2 GPI
Enable/disable DME3 GPI
Enable/disable DME4 GPI
Enable/disable panel GPI
Output test trigger from switcher GPI1
|
Output test trigger from switcher GPI8
Output test trigger from panel GPI1
|
Output test trigger from panel GPI8
Output test trigger from port assigned to DCU
GPI1
|
Output test trigger from port assigned to DCU
GPI50
Enable/disable macro attachment
Macro only mode on/off
Set macro attachment in pre macro mode
Set macro attachment in post macro mode
Macro execution
Macro cancel
Macro auto insert mode on/off
When registering an auto transition macro
event, on/off setting of mode to save transition
rate
When registering an auto transition macro
event for the transition control block, on/off
setting of mode to save A/B Bus cross-point
settings
When registering a timeline macro event, on/
off setting of mode to save applicable region
DME override on/off
DME graphics on/off (applies to graphics for
channel selected in device control block)
Enable/disable operation from an editing
keyboard
Button status
Lit green Lit orange
While freeze being Either of the other two
released states
During frame freeze Either of the other two
states
During field freeze
Either of the other two
states
While freeze being Either of the other two
released states
Enabled Disabled
Enabled Disabled
Enabled Disabled
Enabled Disabled
Enabled Disabled
Enabled Disabled
Output (lights only at When the output is
the instant the button assigned
is pressed)
Output (lights only at When the output is
the instant the button assigned
is pressed)
Output (lights only at When the output is
the instant the button assigned
is pressed)
Enabled Disabled
On Off
Can be set only while When the function is
pressed (lit) assigned
Can be set only while When the function is
pressed (lit) assigned
During execution When the function is
assigned
Lights only at the When the function is
instant the button is assigned
pressed
On Off
On Off
On Off
On Off
On Off
On Off
Enabled Disabled
Setting Button Assignments (Prefs/Utility Menu)
595