Table of Contents
Advertisement
Name
Description
GO TO TC
Press this button, turning it on, to enter a
(Go to
numeric value from the numeric keypad
timecode)
control block, and move the edit point to the
specified timecode position.
• Press this button, turning it on, to enter a
GO TO KF
(Go to
numeric value from the numeric keypad
keyframe)
control block, and move the edit point to the
specified keyframe.
• During macro editing, pressing this button
moves the edit point to the event number
specified by numeric entry with the numeric
keypad control block.
• When this button is pressed, the edit point
PREV KF
(previous
moves to the keyframe immediately before
keyframe)
the current time (the position where the
effect is currently stopped).
• During macro editing, pressing this button
moves the edit point to the event
immediately before the current event.
• When this button is pressed, the edit point
NEXT KF
(next
moves to the keyframe immediately after
keyframe)
the current time.
• During macro editing, pressing this button
moves the edit point to the event
immediately after the current event.
c Editing buttons
The following buttons are used to edit keyframes.
Name
Description
ALL
Press this button, turning it on, to select all
keyframes (during macro editing, all events) in
the effect.
FROM TO
Press this button, turning it on, to enter
numeric values from the numeric keypad
control block, and select a specified range of
keyframes (during macro editing, the specified
range of events).
52
Names and Functions of Parts of the Control Panel
Name
Description
• When this button is pressed, a new
INS (insert)
keyframe is inserted after the current
keyframe.
• Pressing this button while holding down the
[SHIFT] button inserts a new keyframe
before the current keyframe.
• During macro editing, pressing this button
registers an event after the current event.
• During macro editing, holding down the
[SHIFT] button and pressing this button
inserts a new event before the current
event.
• When this button is pressed, the selected
MOD
(modify)
keyframe is modified with the values of the
current keyframe.
• When the edit point is between two
keyframes, the immediately preceding
keyframe is modified.
• You can also select multiple keyframes, and
modify them in a single operation. At this
time, pressing this button while holding
down the [SHIFT] button modifies all
selected keyframes with the changed
values taken as relative values.
• During macro editing, pressing this button
amends the selected event.
• You can also select multiple events, and edit
them in a single operation.
• When this button is pressed, the selected
DEL
(delete)
keyframe is deleted.
• When the edit point is between two
keyframes, the immediately preceding
keyframe is deleted.
• During macro editing, pressing this button
deletes the selected event.
• You can also select multiple keyframes or
macro events, and delete them in a single
operation.
• When this button is pressed, the selected
COPY
keyframe (during macro editing, macro
event) is copied.
• You can also select multiple keyframes or
macro events, and copy them in a single
operation.
• When this button is pressed, the deleted or
PASTE
copied keyframe (during macro editing,
macro event) is inserted after the current
keyframe (during macro editing, macro
event).
• Pressing this button while holding down the
[SHIFT] button inserts the deleted or copied
keyframe (during macro editing, macro
event) before the current keyframe (during
macro editing, macro event).
SHIFT
Hold down this button, and press the [INS]
button, [MOD] button, or [PASTE] button, to
obtain the shifted function for the button.
Advertisement
Table of Contents
