Sony MVS-8000X SystemMVS-7000X System User Manual page 158

Knob Parameter Adjustment
1 H
2 V
3 All
Applying a mosaic
1
In the M/E-1 >Key1 >Processed Key/Resizer
>Enhanced Effect menu, press [Mosaic], turning it on.
2
Set the parameters.
This operation is the same as the DME mosaic setting.
For more details, see "Mosaic Settings" (page 307).
3
In the < Mosaic/Defocus Mode > group, select the
signal to which to apply the mosaic effect.
Video/Key: Video signal and key signal
Video: Video signal only
Notes
If mosaic is enabled, and in the <Mosaic/Defocus
Mode> group you select Video/Key, then the crop and
mask are disabled.
To make the mosaic like a relief pattern
1
With [Mosaic] on, press [Relief], turning it on.
2
In addition to the mosaic parameters, set the following
parameters.
Knob Parameter Adjustment
3 Gain
4 Angle
Defocusing
1
In the M/E-1 >Key1 >Processed Key/Resizer
>Enhanced Effect menu, press [Defocus], turning it
on.
2
Set the parameters.
This operation is the same as the defocusing setting
when using the DME with the DME dedicated
interface (see page 303).
158
Resizer
Setting values
Horizontal gain 0.00 to 100.00
adjustment
Vertical gain 0.00 to 100.00
adjustment
Both horizontal
H value is
and vertical displayed
adjustment
Setting values
Relief depth of 0.00 to 100.00
mosaic cells
–8.00 to +8.00
Light source
direction
However, <Mosaic/Defocus Mode> appears in place
of <Defocus Mode>.
Notes
If defocus is enabled, and in the <Mosaic/Defocus Mode>
group you select Video/Key, then the crop and mask are
disabled.
Applying a mask to mosaic or defocus
1
In the M/E-1 >Key1 >Processed Key/Resizer
>Enhanced Effect menu, press [Dual Rszr Effect],
turning it on.
2
Press [Mask], turning it on.
This enables the mask function.
To make the mask settings, continue with steps 3 and
following.
3
Press [Mask Menu].
The Mask menu appears.
4
In the <Mask Source> group, select either of [Box]
and [Circle].
Box: Use a box pattern as the mask signal.
Circle: Use a circle pattern as the mask signal.
5
Set the parameters.
The valid ranges of the parameter values depend on the
combination of signal format (SD/HD) and aspect
ratio (4:3/16:9) selected in the system, as follows.
The parameters are the same as for drop shadow.
For more details, see "Applying a drop shadow"
(page 157), except that knobs 3 and 5 are as follows.
Knob Parameter Adjustment
3 Size Size
5 Aspect Aspect ratio
The rotation and inversion operations are the same as
for a DME mask setting.
For more details, see "Mask Settings" (page 310).
Notes
• When a mask effect is applied to a border, the
boundary becomes discontinuous, giving an
unnatural effect. Avoid applying a mask to a border.
• If mosaic or defocus is enabled, and in the <Mosaic/
Defocus Mode> group you select Video/Key, then
the mask is disabled.
Setting values
0.00 to 100.00
–100.00 to
+100.00