Sony MVS-8000X SystemMVS-7000X System User Manual page 332

settings, a selection of "Mix Color" or "Ext Video" in
any of the other effects is disabled, and "Flat Color" is
selected in its place.
• When executing combining four channels of DME
images, "Mix Color" and "Ext Video" in the flex shadow
and background effects cannot be selected.
Freeze Video: Use freeze images of the input video as
source of the trail.
Flat Color: Use a flat color matte as source of the trail.
You can set the following parameters with the knobs.
Knob Parameter Adjustment
1 Luminance Luminance
2 Saturation
3 Hue
Hue Rotate: Use a color matte whose hue varies slightly
with each frame for the trail of the afterimages. You
can set the following parameters with the knobs.
Knob Parameter Adjustment
1 Luminance Luminance
2 Saturation
3 Hue
Speed
Mix Color: Insert a mix color signal set in the Color Mix
menu (see page 302) in the afterimage portion.
Ext Video: Insert the external video signal input to the Ext
IN connector in the afterimage portion.
Rainbow: Use a freeze image with the hue changing every
frame in the afterimage portion. The difference from
"Hue Rotate" is that many colors appear
simultaneously.
For details of the Rainbow parameters, see the "Hue
Rotate" item above.
Erasing the afterimages that remain in
memory whenever a keyframe is passed
Press [Trail Eraser], turning it on.
When the effect passes a keyframe, the afterimage is
erased before writing a new afterimage.
Selecting the freeze timing
In the <Trail Freeze Timing> group, select the timing for
freezing a trail.
Frame: freeze in frame units.
Field: freeze in field units.
Notes
The freeze timing setting is not required when the
following signal formats are being used.
332
Applying Special Effects (Lighting and Recursive Effects)
Setting values
0.00 to 100.00
Saturation 0.00 to 100.00
Hue 359.99 to 0.00
Setting values
0.00 to 100.00
Saturation 0.00 to 100.00
–12.00 to +12.00
Speed at
which the
hue changes
Signal formats: 1080P/50, 1080P/59.94, 1080PsF/
23.976, 1080PsF/24, 1080PsF/25, 1080PsF/29.97,
720P/50, 720P/59.94
Defocusing the afterimage portion
(Defocus)
Notes
The function to defocus the trail afterimage portion is not
supported on the MVE-8000A.
1
Press [Defocus], turning it on.
2
Set the following parameters.
Knob Parameter Adjustment
1 Defocus V Defocusing
of the video
signal
2 Defocus K Defocusing
of the key
signal
Applying stardust to the afterimage
portion
The afterimage portion becomes stardust, and gradually
disappears.
1
Press [Dust], turning it on.
2
Set the following parameters.
Knob Parameter Adjustment
1 Trail Dust Amount of
the
afterimage
disappearing
as stardust
2 Dust Soft Timing with
which
stardust
disappears
3 Dust Size Size of
stardust
4 Dust Aspect ratio
Aspect of stardust
a) The way in which the afterimage disappears is affected by both
Decay and Trail Dust parameter adjustments.
Setting a combine process
Select whether to add the Trail effect before or after the
combine.
Setting values
0.00 to 100.00
0.00 to 100.00
Setting values
0.00 to 100.00
a)
0.00 to 100.00
0.00 to 100.00
–100.00 to +100.00