Table of Contents
Advertisement
Name
Description
• After recalling a register, press this button to
UNDO
return to the state before recalling the
register.
• When contents have been saved to a
register, hold down the [STORE STATS]
button and press this button to return the
register to its state before the save
operation.
• When a save or delete operation has been
STORE
STATS
carried out on a register, this button lights
(store
amber.
status)
• After saving to a register, hold down this
button and press the relevant register button
to delete the data in the register.
• Again, after a save operation on a register,
hold down this button and press the [UNDO]
button to restore the register to its state
before the save operation.
Key Control Block
Each of the M/E banks and the PGM/PST bank includes
eight keyers (for keys 1 to 8), and you can delegate this
1 Delegation buttons
2 Key type selection
buttons
3 Key fill/key source
selection buttons
4 Key modifier buttons
6 SHOW KEY button
5 MORE button
a Delegation buttons
Pressing the following buttons selects a keyer and an M/E
or PGM/PST bank to which the key control block is
delegated.
42
Names and Functions of Parts of the Control Panel
e XPT HOLD (cross-point hold) status display
A bus for which cross-point hold is set appears as a green
light.
f Numeric display
Depending on the operation mode, this shows the pattern
number of a wipe or DME wipe, a bank number, a register
number, a transition rate, and so on in up to four digits.
control block to any desired keyer. In this control block,
you can adjust and modify keys.
q; ON AIR indicators
qg RESIZER button
9 DME channel
selection buttons
qa Output destination specification buttons
qd TRACE button
qs OVERRIDE button
8 Displays
7 Knobs
qf AUTO DELEG button
Advertisement
Table of Contents
