Table of Contents
Advertisement
2
Using any of the following methods, select the
category or the set of categories as candidates for the
locking operation.
• Press directly on the desired list in the status area.
• Press the arrow keys to scroll the reverse video
cursor.
• Turn the knobs.
Knob Parameter Adjustment
1
No
Selection of a
category by its
number in the list
3
Num
Selection of
number of
categories in the
list
• To select all categories, press [ALL].
3
Press [Lock].
This makes the selected categories candidates for
locking. The category name display color changes to
yellow, and the indication "Lock" is displayed in
yellow in the Lock box.
To deselect a lock candidate
After selecting a category, press [Clear] to clear the
indication "Lock" in the Lock box.
4
Repeat steps 2 and 3, to select all of the lock
candidates.
5
Press [Execute].
A keyboard window appears.
6
Enter the password with a maximum of 16 characters,
and press [Enter].
If the password is correct, the categories selected in the
list of candidates are all locked. The category name
display color and the "Lock" indication color in the
Lock box both change to white.
To release the lock
When a lock is already applied, use the following
procedure.
1
In the System >Maintenance >File Load Lock menu,
press [Lock].
A keyboard window appears.
2
Enter the password.
If the password is correct, the lock is released, and the
indication "Lock" in the Lock box disappears.
To change the lock password
In the System >Maintenance >File Load Lock menu, press
[Change Password], and carry out step 2 and following of
"Changing the lock password" (page 564).
Setting values
1 to 14
1 to 14
System Maintenance (Maintenance Menu)
565
Advertisement
Table of Contents
