Sony MVS-8000X SystemMVS-7000X System User Manual page 267

2
In each of the <M/E Split (1st Board)> to <M/E Split
(3rd Board)> groups, select one of [1ME] to [4ME].
Restrictions in 3M/E mode and 4M/E mode
In 3M/E mode and 4M/E mode, the following restrictions
apply.
Classification 3M/E mode
Operation mode All M/Es and
P/P
M/E-1, M/E-2
M/E assignment All M/Es and
P/P
Wipes All M/Es and
P/P
M/E-2
Wipe border M/E-2
M/E outputs M/E-1, M/E-2
Signal selection M/E-1, M/E-2
Utility bus M/E-1
M/E-2
M/E-2
DSK mode and multi-program 2
mode cannot be set.
[Utility 2] cannot be selected for the
background in multi-program mode.
Logical M/E Assign cannot be used.
• Pattern mix cannot be used.
• Pattern number 162 wipes cannot
be used.
• Random/diamond dust wipes can
be used.
• Dust mix cannot be used.
Wipe border colors are single-color
only.
Out5 and Out6 cannot be used.
PROC V and PROC K signals
cannot be selected with any cross-
point button.
Since only one utility bus is available,
utility 1 bus is used instead of utility 2
bus in the following functions.
• Wipe border
• Preset color mix
• Backgrounds of DME wipes
Since only one utility bus is available,
you cannot select the following
functions.
• Key border
• Sub mask
• Preset color mix
• Wipe border
If you select a DME wipe which uses
a utility bus for a background image,
a color matte signal is used instead
of a utility bus signal.
For no assignment to any M/E, select [Disable].
3
Press [Execute].
4M/E mode
• DSK mode and multi-program 2
All M/Es and
P/P
mode cannot be set.
• [Utility 2] cannot be selected for
the background in multi-program
mode.
All M/Es and Logical M/E Assign cannot be used.
P/P
• Pattern mix cannot be used.
All M/Es and
• Pattern number 162 wipes cannot
P/P
be used.
• Random/diamond dust wipes can
M/E-2, M/E-3
be used.
• Dust mix cannot be used.
M/E-2, M/E-3 Wipe border colors are single-color
only.
All M/Es and Out5 and Out6 cannot be used.
P/P
All M/Es and PROC V and PROC K signals
P/P cannot be selected with any cross-
point button.
M/E-1, P/P Since only one utility bus is available,
utility 1 bus is used instead of utility 2
bus in the following functions.
a)
• Wipe border
• Preset color mix
• Backgrounds of DME wipes
M/E-2, M/E-3 Since only one utility bus is available,
you cannot select the following
functions.
• Key border
• Sub mask
• Preset color mix
• Wipe border
M/E-2, M/E-3 If you select a DME wipe which uses
a utility bus for a background image,
a color matte signal is used instead
of a utility bus signal.
267
M/E Configuration Switching