Sony MVS-8000X SystemMVS-7000X System User Manual page 101

The topmost key as seen on the program monitor is priority
1, and the keys underneath are numbered 2, 3, 4 away from
the viewer (see page 100).
To display the key priority for after the transition, press the
[KEY PRIOR] button in the transition control block,
turning it on. For keys for which the priority after the
transition is different from the current priority, the
corresponding numerals 1 to 4 flash. For a key with the
same priority, the indication remains on.
Example key status display given when the [KEY PRIOR]
button is pressed:
Current key priority: 1, 2, 3, 4
Key priority after the transition: 3, 2, 1, 4
Indicators: 1, 3 (flashing), 2, 1 (flashing), 3, 4
Lit Lit
Flashing
Example key status display
(showing the key priority after the transition)
Priority Setting for Keys 1 to 8
Set the priority for each of the groups consisting of keys 1
to 4 and keys 5 to 8.
1
In the VF7 'Misc' menu, select HF3 'Key Priority,' to
display the Key Priority menu.
2
In <Higher Group>, press the button for the group you
want to be higher.
The button you pressed lights green, and this becomes
the reference group.
3
Set the reference group priority.
Lit
Flashing Lit
4
In <Lower Group>, select the other group.
5
Set the priority for the other group.
101
Key Priority Setting