Table of Contents
Advertisement
Selecting the color correction input signal
After assigning CCR1 and CCR2 to AUX buses, use the
following procedure.
1
Press the AUX delegation buttons assigned to CCR1
(or CCR2).
2
In the cross-point button row, select the signal to
which you want to apply color correction.
Notes
The signals that can be selected on the CCR1 and
CCR2 buses are primary inputs, premium inputs,
format converter inputs and frame memory outputs
(FM1 to FM8) only.
However you can make all the internal signals of the
switcher selectable by a setting in the Setup menu.
For details, see "Selecting the Bank to Make the
Settings" in Chapter 20 (Volume 2).
Selecting the color corrector output signal
By assigning the signal output from the color corrector to
a cross-point button, you can make that signal available on
that button.
For details of the assignment process, see "Cross-Point
Settings (Xpt Assign Menu)" in Chapter 19 (Volume 2).
Accessing the CCR menu
For color correction operations, use the CCR menu.
To access the CCR menu, in the menu control block, press
the top menu selection button [CCR].
The following description uses CCR1 as an example. To
apply color correction to CCR2, replace VF1 'CCR1' by
VF2 'CCR2,' and follow the same procedure.
Overall Color Corrector
Operations
Enabling Color Corrector
To enable the functions of color corrector 1, for example,
use the following procedure.
1
In the CCR menu, press VF1 'CCR1' and any HF.
2
In the <CCR> group, press [CCR], turning it on.
Returning all color corrector settings to
their defaults
1
In the <CCR> group, press [Unity].
A confirmation message appears.
2
Press [Yes].
This returns all color corrector settings to their
defaults, whether [CCR] is on or off.
Copy and Swap Operations
Copying color corrector data
1
In the CCR menu, press VF5 'Copy/Swap.'
The Copy/Swap menu appears.
The status area shows a copy source list on the left and
a copy destination list on the right.
2
Using any of the following methods, select the copy
source data and copy destination data.
• Press directly on the list in the status area.
• Press the arrow keys to scroll the reverse video
cursor.
• Turn the knobs.
Knob Parameter Adjustment
1
Left No
Select copy
source data
2
Right No
Select copy
destination
data
3
Press [Copy].
Setting values
1 or 2
1 or 2
Overall Color Corrector Operations
241
Advertisement
Table of Contents
