Spot Color Adjustment - Sony MVS-8000X SystemMVS-7000X System User Manual

Applying luminance processing
1
In the CCR menu, press VF1 'CCR1' and HF5
'Luminance Process.'
The Luminance Process menu appears.
2
In the <Luminance Process> group, press [Luminance
Process], turning it on.
3
In the <Mode> group, specify the adjustment mode.
Tint: add a specified color to the original video signal.
Color Modify: adjust the original video signal.
Y Modify: adjust the output levels of the input
luminance signal.
When tint mode or color modify mode is selected, skip
to step 4.
When Y modify mode is selected, adjust the following
parameters.
Knob Parameter Adjustment
1 White
2 Black
3 Y Lift
4 Y Dark
4
In the <Bound> group, make the settings for the three
regions (Dark, Middle, and Bright).
[Level] parameters: set the boundaries of the three
regions.
Knob Parameter Adjustment
1 Over B
Level
2 Mid B
Level
3 Dark Mid
Level
4 Under D
Level
[Soft] parameters: set the degree of boundary
softness of the three regions.
246
Color Corrector Functions
Setting values
White 0.00 to 200.00
balance
adjustment
–100.00 to +100.00
Black
balance
adjustment
–100.00 to +100.00
Curvature of
curve
–7.31 to +109.59
Position of
maximum
point of
curve
Setting values
Luminance 50.00 to 150.00
level of the
Over Bright
point
Luminance 10.00 to 120.00
level of the
Bright/Middle
point
–20.00 to +90.00
Luminance
level of the
Middle/Dark
point
–50.00 to +50.00
Luminance
level of the
Under Dark
point
Knob Parameter Adjustment
1 Over B Degree of
softness at
Soft
Over Bright
point
2 Mid B Soft Degree of
softness at
Bright/Middle
point
3 Dark Mid Degree of
Soft softness at
Middle/Dark
point
4 Under D Degree of
Soft softness at
Under Dark
point
5
In the <Luminance Process Adjust> group, press
[Dark], [Mid], or [Bright], and adjust the following
parameters for the three regions.
In tint mode
Knob Parameter Adjustment
1 Luminance Luminance
2 Saturation Saturation
3 Hue Hue
In color modify mode
Knob Parameter Adjustment
1 Luminance Luminance
2 C Gain Chrominanc
e signal gain
3 Hue Delay Hue delay
To return the parameters to their default settings
In the <Luminance Process> group, press [Unity].

Spot Color Adjustment

You can change the color of a specified color region to a
different color, without affecting other regions. You can
also mask part of such a region.
Then for the region other than the region whose color you
have changed, you can make the following corrections.
• Video signal overall gain adjustment
• Y signal gain adjustment
• Y signal offset adjustment
• C signal gain adjustment
• C signal hue adjustment
Setting values
15.00 to 70.00
15.00 to 42.50
15.00 to 42.50
15.00 to 70.00
Setting values
–100.00 to +100.00
0.00 to 100.00
359.99 to 0.00
Setting values
–100.00 to +100.00
0.00 to 200.00
–180.00 to +180.00