Show System Sensors - Cisco Sx350 Cli Manual

62
1201
Example 1: For devices whose hardware supports variable fan speed.
switchxxxxxx> show system fans
Unit Speed State
(RPM)
--- --------- ------------------
1 8000 Fans OK, redundant fan ready

62.18 show system sensors

To view the temperature sensor status, use the show system sensors EXEC mode
command.
Syntax
show system sensors
Parameters
This command has no arguments or keywords.
Default Usage
None
Command Mode
User EXEC mode
Examples
For Standalone systems with a single sensor status
switchxxxxxx> show system sensors
Sensor Status: OK
Cisco Sx350 Ph. 2.2.5 Devices - Command Line Interface Reference Guide
System Management Commands