62
1203
•
Available - Power supply is connected but is not used.
•
Not Connected - The PD port is not connected or not connected to PSE.
When the PD Power supply status is Active or Available the PD power supply type
can be one of the following:
•
802.3AF.
•
802.3AT.
•
60W POE.
When the power supply changes to PD power supply (PD), the following syslog
message is created: Power supply source changed to PD Power Supply.
Examples
switchxxxxxx> show system power-supply
Power Supply
Main
Redundant
Show power supported with PoE:
switchxxxxxx> show system power-supply
62.20 show system id
Power Supply
Main
Redundant
PD
(AT)
gi18
To display the system identity information, use the show system id EXEC mode
command.
Status
Active
Available
Status
PoE Budget (Watt)
Active
70
Not Available
Available
0
Cisco Sx350 Ph. 2.2.5 Devices - Command Line Interface Reference Guide
System Management Commands