Spanning-Tree Mst Priority - Cisco Sx350 Cli Manual

Spanning-Tree Commands
Cisco Sx350 Ph. 2.2.5 Devices - Command Line Interface Reference Guide
Command Mode
Privileged EXEC mode
User Guidelines
This feature can only be used when working in RSTP or MSTP mode.
Example
This restarts the STP migration process on all interfaces.
switchxxxxxx# clear spanning-tree detected-protocols

58.18 spanning-tree mst priority

Use the spanning-tree mst priority Global Configuration mode command to
configure the device priority for the specified spanning-tree instance. Use the no
form of this command to restore the default configuration.
Syntax
instance-id priority priority
spanning-tree mst
no spanning-tree mst
Parameters
•
instance-id—Specifies the spanning-tree instance ID. (Range:1–7)
•
priority—Specifies the device priority for the specified spanning-tree
instance. This setting determines the likelihood that the switch is selected
as the root switch. A lower value increases the probability that the switch is
selected as the root switch. (Range: 0–61440)
Default Configuration
The default priority is 32768.
Command Mode
Global Configuration mode
instance-id priority
58
1116