Chapter 4 - Functional Checks; Introduction; Required Equipment - GE RTfino/RT3200 Service Manual

GE MEDICAL SYSTEMS
REV 0
4–1 INTRODUCTION
This chapter provides procedures for quickly checking of the RTfino/RT3200 Advantage–II/RT–x200. The other
service chapters are Chapter 6, Service Adjustments.
These procedures form part of the Installation Checklist found in Chapter 3, Installation, and
should be performed during installation.
However, these procedures are also the basic checks to use when service is required. In this
case, use this section's table of contents to locate and exercise the specific function related to the
service complaint.
4–1–1 Required Equipment
To perform these tests, you'll need the following items:
3.5 MHz B Type Linear Transducer or a 3.5 MHz CB type convex transducer.
RTfino/RT3200 Advantage–II/RT–x200 SERVICE MANUAL
Note
4–3
P9030GX
FUNCTIONAL CHECKS