Block Header Bar - GE Measurement & Control Druck DPI 620 Genii User Manual

User Manual

7.6.1 Block Header bar

The block header bar indicates the target and actual mode
of the block.
The Highlighted text indicates the actual mode of the device
block. The highlight is shown in green if the target mode is
equal to the actual mode of the device block. If the target
mode does not equal the actual mode of the device block,
the highlight is in red
The target mode of the device block is indicated by blue
text.
Available options are indicated by black text, unavailable
options are shown in grey.
The target mode can be changed with a momentary touch
on the block header
Figure 7-11 shows example where target mode is Auto but
actual mode is Out of Service (OOS)
06 June 2013
Figure 7-11 Block Header Bar
Druck DPI620 Genii
Page 116 of 179