RS-34
SUPPlEMENTAL RESTRAINT SYSTEM
CAUTION:
•
Make sure that the wire harness is tight. It is very dan
gerous if looseness in the wire harness results in the
front passenger alrbag assembly coming tree due to
the shock from the airbag deploying.
•
Always tie down the front passenger airbag assembly
with the airbag deployment side facing Inside.
NOTICE:
The tire will be marked by the airbag deployment, so when
disposing of the airbag use a redundant tire.
Check functioning of the SST {See step 1 -(a) on page
{c )
R&-16 ).
SST
Battery
Place the tires.
(d)
(1)
(2)
Ti r
e
s
or more)
(5
Htl�
(3)
CAUTION:
Make sure that the wire harness is tight. It Is very danger
ous If loose wire harnesses result In the tires coming free
due to the shock from the airbag deploying.
HINT:
at least 1 m {3 ft) of slack for tile wire harness.
Place the SST connector and wire harness inside tires. Provide
FRONT PASSENGER A!
BAG ASSEMBLY
A
09082-00700
Place at least 2 tires under the tire to which the front
passenger airbag assembly is tied.
Place at least 2 tires over the tire to which the front
passenger airbag assembly is tied. The top tire
should have the whee! installed.
Tie the tires together with 2 wire harness.