SR-46
SST · ·
SST
N
Rack Teet h End
STEERING
REASSEMBLY
NOTICE:
When using a vise, do not overtighten it.
COAT PARTS INDICATED BY ARROWS WITH POWER
1 .
STEERING FLUID OR MOLYBDENUM DISULFIDE
LITHIUM BASE GREASE (See page SR-33)
2.
INSTALL OIL SEAL
Coat a new oil seal lip with power steering fluid.
{a)
Install the oil seal to SST, and press them into the rack
(b)
housing.
SST
NOTICE:
..
Make sure that the oil seal is installed facing In the
correct direction.
f09587
Take care that the oil seal does not get reversed as
you Install it.
3.
INSTALL STEERING RACK
Install SST to the rack.
(a}
SST
HINT:
It necessary, scrape the burrs off the rack teeth end and bur
nish.
Coat SST with power steering fluid.
(b)
Install the steering rack into the rack housing.
(c)
Remove the SST.
(d)
SST
SST
W02101
POWER STEERING GEAR
0995o-6001 0 (0995HJ0240, 0995HJ0400,
09952-0601 0), 0995D-7001 0 (09951-07360)
09631-20051
09631-20051