Toyota Celica 2000 Repair Manual page 497

AX-34
AUTOMATIC TRANSAXLE (U240E)
--
AUTOMATIC TRANSAXLE UNIT
REMOVE UPPER SIDE ENGINE LEFT MOUNTING,
25.
NUT AND BOLT
Torque: 80 N-m (816 kgf.cm, 59 ft - l bf)
REMOVE OIL COOLER HOSE
26.
Loosen the 2 clips and disconnect the 2 oil cooler hoses.
SUPPORT TRANSAXLE WITH A JACK
27.
28. REMOVE TORQUE CONVERTER CLUTCH MOUNT­
ING BOLT
Turn the crankshaft to gain access and remove the 6 bolts hold­
ing the crankshaft pulley set bolt with a wrench.
Torque: 41 N-m (418 kgf.cm, 30 ft-lbf)
HINT:
At the time of insta!!ation, please refer to the following item.
First install black colored bolt and then 5 other bolts.
29. REMOVE TRANSAXLE ASSEMBLY
Remove the 4 bolts.
(a)
Torque:
A bolt: 46 N-m (470 kgl-cm, 34 ft-lbf)
B bolt: 23 N-m (230 kgf.cm, 1 7 ft-lbf)
Separate the transaxte from engine, and lower the trans­
(b)
axle.