Tester connecl!0/1
3 - Ground
1 - Ground
Ground
1 -
Vehicle is under the
direct
sun light.
(Sensor is not covered)
BODY ELECTRICAL
-
HEADLIGHT AND TAILLIGHT
Connect the wire harness side connector to the sensor
{b)
and inspect wire harness side connector from the back
side.
H IN T:
Ignition switch ON.
Light control switch OFF.
•
Vehicle's surroundings are bright.
1012$5
Condition
Constant
Ignition switch LOCK or ACC
Ignition
switch ON
If c1rcu1t ts as spec1hed, try replacmg the sensor with a new one.
If the circuit is not as specified, inspect the circuit connected to
other parts.
SYSTEM
Specilied
Continuity
No voltage
9.5 V
Taillight and tleadt©hl are ON.
. .
BE-19
coodilion
or
more