Toyota Celica 2000 Repair Manual page 531

AX-28
AUTOMATIC TRANSAXLE (U341E) - FLOOR SHH-1 ASSEMBLY
r ®
- u -t®
_ :l _fr_@
e pedal depr e ssed,
b
J
l e ase but t o n i n .
With the rak
shift while holding the l
ON
hol d i n g
(The ignition switch
position.)
tt
Shift while
{7-0
on in.
Shift normally
N
Connect the 2 key interlock cable clamps.
Pull in the cable while pressing the clip of the key interlock
cable.
INSTALL AIR CONDITIONING UNIT
3.
(See page AC-29)
INSTALL INSTRUMENT PANEL (See page AG-29)
4.
INSPECT KEY INTERLOCK AND SHIFT LOCK OP­
5.
ERATION
Check that a key can be turn from ACC to LOCK only
when the :;hift lever is in P position.
Check that the key cannot be turned to LOCK when the
(b)
shift lever is position in other than P position.
When the ignition key is in LOCK, check that pressing the
(c)
shift release button enables the shift lever to shift from P
position to other positions.
When shifting it to each position, make sure that the shift­
(d)
ing lever moves smoothly, can be moderately operated
and the position indicator displays correctly.
Positions which can be operated without pressing
the shift lever knob button
----7
R
Positions which can be operated only while pressing
the shift lever knob button
'>
oc r e ­
-
D
Positions which can be operated only while pressing
must be
k
the shift lever knob button, Ignition switch ON and
brake pedal depressed
l o ck
in
P -> R
When starting the engine make sure that the vehicle
(e)
the
moves forward when shifting form N to D position, and
moves rearward when shifting to R position.
ADJUSTMENT IN CASE OF MALFUNCTION
6.
When the key can not be turned from ACC to LOCK even
(a)
though the shift lever is in P position:
This is the condition where the cable end on the ignition
key side is not returned to the position where it can be
locked. The condition is caused by undue bending of the
cable, rotative resistance of the pin on the shift lever side,
or increased resistance due to any reason such as twist - ­
ing of the cable. Reinstall and readjust the key interlock
cable.
-·'> 0,
----7 ----7 ----7
N D 2 0
L
-1
-1- �>
2 L, N R P
---'>
N