Front Airbag Sensor Removal - Toyota Celica 2000 Repair Manual

RS-08
FRONT AIRBAG SENSOR
RESTRAINT SYSTEM
REMOVAL
NOTICE:
•
If the wiring connector of the SRS is disconnected
with the Ignition switch at ON position, DTCs will be
recorded.
Never use SRS parts from another vehicle. When rr
placing parts, replace them with new parts.
•
Never reuse the sensor involved in a collision when
the SRS has deployed.
•
Never repair a sensor In order to reuse it.
1 . LH:
REMOVE FRONT AIRBAG SENSOR
Remove the air cleaner hose.
(a)
Remove the air cleaner cap.
(b)
(c) Remove the air filter.
Remove the 2 bolts and air cleaner case.
(d)
Disconnect the connector.
(e)
NOTICE:
Disconnect the connector with sensor assembly installed.
Remove the 2 bolts and front airbag sensor LH.
(f)
RH:
2.
REMOVE FRONT AIRBAG SENSOR
(a) Remove the 5 clips and upper front fender apron sea!.
Disconnect the connector.
(b)
NOTICE:
Disconnect the connector with sensor assembly installed.
Remove the 2 bolts and front airbag sensor RH.
(c)