Hood Adjustment - Toyota Celica 2000 Repair Manual

Centering Bolt Standard Bolt
!lOOD
-
BODY
HOOD
ADJUSTMENT
HINT:
Since the centering bolt is used as the hood
bolt, the hood cannot be adjusted with it on. Substitute the stan­
dard bolt for the centering bolt.
1 . ADJUST HOOD I N FORWARD/REARWARD A N D
LEFT/LIGHT DIRECTIONS
Adjust the hood by loosening the hood side hinge bolts.
(a)
Tighten the loosened bolts again.
( b)
Torque: 1 3 N-m (130 kgt-cm, 9 fl·lbf)
2. ADJUST FRONT EDGE OF HOOD IN VERTICAL
DIRECTION
Adjust the hood by turning the cushions.
3. ADJUST HOOD LOCK
Remove the upper front fender apron seal.
{a)
Remove the upper radiator support seal.
(b)
Remove the radiator reservoir.
{c )
Adjust the hood lock by loosening the bolts.
(d)
Tighten the loosened bolts again.
(e)
Torque: 6.9 N-m (70 kgl-cm, 61 in.-lbt)
Reinstall the removed parts.
(f)
80-9
hinge
and Jock set