Toyota Celica 2000 Repair Manual page 434

Hide thumbs Also See for Celica 2000:

Table of Contents

MANUAL TRANSAXLE

INSPECT INPUT SHAFT

Check the input shaft for wear or damage.

Using a micrometer, measure the outer diameter of the in

put shaft journal surtace.

Minimum outer diameter:

Part A: 21 .991 mm (0.8658 ln.)

Part B: 24.885 mm (0.9797 in.)

Part C: 28.985 mm (1.1411 in.)

Part D: 30.985 mm (1.2199 in.)

Part E: 24.985 mm (0.9837 in.)

If the outer diameter is less than the minimum, replace the input

Using a dial indicator, check the shaft runout

Maximum runout: 0.03 mm (0.0012 ln.)

1f the runout exceeds the maximum, replace the input shaft.

Troubleshooting