Toyota Celica 2000 Repair Manual page 532

p
AUTOMATIC TRANSAXLE {U341E)
{b)
7.
HINT:
Assembly shall be undertaker in the same way as step 2.
(a)
(b)
{c)
(d)
(e)
FLOOR SHIFT ASSEMBLY
When the key is turned from ACC to LOCK even though
the shift lever is in other than P Position:
Since the cable is too long due to improper adjustment at
the automatic adjustment part of the key can not be
locked. Readjust the key interlock cable.
READJUSTMENT OF KEY INTERLOCK CABLE
Using a screwdriver, unlock the claw of the lock key of the
automatic adjustment part.
Remove the key interlock cable end from the rod of the
floor shift assembly.
Pull out the cable white pressing the clip of the key inter­
lock cable.
Remove the cable clamp from the other.
With the key in ACC, install the cable cap claw to the key
interlock.
AX-29