Toyota Celica 2000 Repair Manual page 365

MX-20
-
TAANSAXLE !C56l
MANUAL
Using a magnetic finger, remove the 2 balls from the re­
(e)
verse shift fork.
Remove the No. 3 gear shift fork shaft and reverse shift
(f )
fork.
Pull out the No.
(g)
Remove the No. 1 and No. 2 gear shift forks.
(h)
REMOVE INPUT AND OUTPUT SHAFTS TOGETHER
28.
FROM TRANSAXLE CASE
Z000 7 4
REMOVE DIFFERENTIAL CASE ASSEMBLY
29.
NOTICE:
At the time of reassembly, please refer to the following
item.
Before reassembly, inspect the differential tapered roller
bearing preload. (See page MX-49)
REMOVE MAGNET FROM TRANSAXLE CASE
30.
DISASSEMBLE NO. 3 CLUTCH HUB ASSEMBLY
31.
Using a screwdriver, remove the shifting key spring.
(a)
NOTICE:
At the time of reassembly, please refer to the following
item.
Position the shifting key springs so that their end gaps are
not aligned.
Remove the 3 No. 3 shifting keys from the No. 3 clutch
{b)
hub.
MANUAL TAANSAXLE ASSEMBLY
gear shift fork shaft.
1