BODY
ELECTRICAL
WIRELESS DOOR LOCK CONTROL SYSTEM
REPLACEMENT
1.
REPLACE TRANSMITTER (LITHIUM) BATTERY
NOTICE:
Special caution should be taken for handling each compo
nent as they are precision electronic components.
Using a screwdriver, remove the cover.
(a)
NOTICE:
Do not pry out the cover forcibly.
HINT;
Push the cover with a finger as shown in the illustration, so that
there becomes clearance, then pry out the cover from that
clearance.
Remove the transmitter.
(b)
Remove the battery (lithium battery).
NOTICE:
•
Do not push the terminals with a finger.
•
If prying up the battery (lithium battery) forcibly to re
move, the terminals are deformed.
Install a battery (lithium battery) as shown i n the illustra-
{d)
tion.
NOTICE:
Face the battery upward. Take care not to deform the termi
nals.
Assemble the transmitter to the key plate and the cover.
(e)
BE-77