NT
SUPPLEMENTAL
A
ESTRAl
SYSTEM
REMOVAL
NOTICE:
HINT:
For step 1 to 4, refer to page 80-1 1 .
1 .
2.
3.
4.
5.
(a)
NOTICE:
Disconnect the connector with sensor assembly installed.
(b)
-
DOOR SJDE AtRBAG SENSOR
•
If the wiring connector of the SRS is disconnected
with the ignition switch at ON position, OTCs will be
recorded.
Never use SRS parts from another vehicle. When re�
placing parts, replace them with new parts.
•
Never reuse the sensor involved i n a collision when
the SRS has deployed.
Never repair a sensor in order to reuse it.
REMOVE NO. 2 DOOR INSIDE HANDLE BEZEL
REMOVE OUTER MIRROR SWITCH ASSEMBLY
REMOVE FROMT DOOR LOWER FRAME BRACKET
GARNISH
REMOVE DOOR TRIM
REMOVE DOOR SIDE AIRBAG SENSOR
Disconnect the door side airbag sensor connector.
Remove the 2 bolts and door side airbag sensor.