Toyota Celica 2000 Repair Manual page 1067

80-116
SEAT BELT PRETENSIONER
BODY
Activate the seat belt pretensfoner.
(d)
Connect the
( 1 )
terminal and black clip to the battery negative {-)
terminaL
Check that no one is within 1 0 m (33ft) area around
(2)
the disc wheel.
Press the
(3)
seat be!! pretensioner.
HINT:
The seat belt pretensioner operates simultaneously as the LEO
of the SST activation switch lights up .
m
� q
tt)
. · · · ·-· - ·· · - - ·
-
or. - � ---·
(33
Dispose of front seat outer belt (with seat belt pretension­
(e)
er).
CAUTION:
The front seat outer belt Is very hot when the seat belt
pretensioner is activated, so leave It alone for at least
30 minutes after activation.
•
Use gloves and safety glasses when handling a front
seat outer belt with activated seat belt pretensioner.
•
H\31�8
Always wash your hands with water after completing
the operation.
•
Do not apply water, etc. to a front seat outer belt with
activated seat belt pretensloner.
Remove the disc wheel and SST.
( 1 )
Place the front seat outer belt in a vinyl bag. tie the
(2)
end tightly and dispose of it in the same way as oth­
er general parts.
red clip to the battery positive (+)
SST
activation switch and activate the
SST
R0518l