Toyota Celica 2000 Repair Manual page 536

AUTOMATIC TRANSAXLE (U341
Nut
N
-
AUTO�MTIC TflANSAXLE UNI
21. REMOVE SUSPENSION MEMBER
Remove the 9 bolts and 3 nuts.
(a)
Torque:
Bolt A: 157 N-m (1,601 kgf-cm, 1 1 6 ft·lbf)
Bolt B: 52 N-m (530 kgf.cm, 38 ft-lbf)
Bolt C: 39 N-m (398 kgf . cm, 29 ft-lbf)
Nut: 52 N-m (530 kgf-cm, 38 fHbf)
Remove the suspension member.
{b)
22. REMOVE ENGINE REAR MOUNTING INSULATOR
Remove the bolt and engine rear mounting insulator.
Torque: 87 N-m (890 kgf.cm,
ATTACH ENGINE SLING DEVICE TO ENGINE HANG­
23.
ERS
Disconnect the 2 PCV hoses.
(a )
Install the No. 1 and No. 2 engine hangers in the correct
(b)
direction.
Parts No. :
No. 1 engine hanger: 12281-22021
No. 2 engine hanger: 12281-1 5040 or 12281-15050
Bolt: 91512-81016
Torque: 38 N-m (387 kgf.cm, 28 ft.lbf)
Attach the engine chain hoist to the engine hangers.
{c)
CAUTION:
Do not attempt to hang the engine by hooking the chain to
any other part.
AX-33
r
64
ft-lbf)