Electric Tension Reducer System Inspection; Inspect Buckle Switch Continuity - Toyota Celica 2000 Repair Manual

N
Ret u r n s
Ou'1ckly
N
N
-
BODY ELECTRICAL
ELECTrliC TENSION REDUCER SYSTEM
INSPECTION
INSPECT TENSION REDUCER SOLENOID OPERA­
1 .
TION
Connect the positive (+) lead from the battery to terminal
(a)
1 ,
and the negative (-) lead to terminal 2.
Pull the belt upward and check that the belt is slowly re­
(b)
tracted when released.
Disconnect the lead from the battery.
(c)
Pull the belt upward and check that the belt is retracted
(d)
more quickly when released than in (b).
HINT:
Do not tilt the retractor.
If the operation is not as specified, replace the front seat outer
belt assembly .
1>4289
2.

INSPECT BUCKLE SWITCH CONTINUITY

Check that continuity exists between terminals of the
(a)
switch side connector with the switch ON (belt fastened).
Check that no continuity exists between terminals of the
(b )
switch side connector with the switch OFF (belt unfas­
tened).
If operation is not as specified, replace the seat belt inner.
114:/BO
BE-53