Srs Airbag Operation; Steering Wheel Pad; Spiral Cable; Front Passenger Airbag Assembly - Toyota Celica 2000 Repair Manual

RS-2
SUPPLEMENTAL RESTRAINT SYSTEM
Gabie
Spiral
SRS AIRBAG
OPERATION
1 . STEERING WHEEL PAD (with AIRBAG)
The inflater and bag of the
pad and cannot be disassembled. The inflater contains a squib,
igniter charge, gas generator, etc., and inflates the bag when
instructed by the airbag sensor assembly.
2. SPIRAL CABLE (in COMBINATION SWITCH)
A spiral cable is used as an electrical joint from the vehicle body
side to the steering wheel.
fl091<5
3.

FRONT PASSENGER AIRBAG ASSEMBLY

The inflater and bag of the SRS are stored in the front passen­
ger airbag assembly and cannot be disassembled. The inflater
contains a squib, Igniter charge, gas generator, etc., and in­
flates the bag when instructed by the airbag sensor assembly.
4. SIDE AIR BAG ASSEMBLY
The inflater and bag of the SRS side airbag are stored in the
side airbag assembly and cannot be disassembled. The inflater
contains a squib, igniter charge, gas generator, etc., and in­
flates the bag when instructed by the side airbag sensor assem­
bly.
5. SEAT BELT PRETENSIONER
The seat belt pretensioner system is a component of the front
seat outer belt. The pretensioner contains a squib, gas genera­
tor, wire, piston, etc., and operates in the event of a frontal colli­
sion. The seat be!t pretensioner cannot be disassembled.
are stored in the steering wheel
SRS