Toyota Celica 2000 Repair Manual page 1014

Outside
'- -- Fron
QUARTER
BODY WINDOW
7. INSTALL NEW GLASS
(a) Install new glass to the body.
Hold the glass in place securely with a protective tape or
(b)
equivalent until the adhesive hardens.
NOTICE:
Take care not to drive the vehicle during the time described
in the table below .
lemperature
35·c (95°FJ
20"C (6tl"F)
; ,·c (41"fJ
8.
INSPECT FOR LEAK AND REPAIR
(a) Conduct a leak test after the hardening time has elapsed.
Seal any leak with sealant.
(b)
Part No. 06833-00030 or equivalent.
9. INSTALL ROOF DRIP SIDE MOULDING
(See page BD-40)
INSTALL ROOF SIDE RAIL WEATHERSTRIP (See
10.
page BD-40)
INSTALL ROOF SIDE INNER GARNISH
11.
12. INSTALL FRONT SEAT OUTER BELT SHOULDER AN­
CHOR
Torque: 43 N-m (440 kgf . cm, 32 ft-lbf)
13. INSTALL QUARTER TRIM PANEL
14. INSTALL REAR SEAT OUTER BELT FLOOR ANCHOR
Install the rear seat outer belt floor anchor wlth the bolts as
shown in the illustration.
Torque: 43 N-m (440 kgf.cm, 32 ft-lbf)
15.
INSTALL REAR SEATBACK LOCK STRIKER
Torque: 18 N-m (185 kgf.cm, 1 3 ft-lbf)
16. INSTALL REAR SEATBACK HINGE
Torque: 7.8 N-m (80 kgf.cm, 69 in..lbf)
17.
INSTALL DECK TRIM SIDE PANEL
18. INSTALL REAR DECK TRIM COVER
19. INSTALL LUGGAGE COMPARTMENT MAT
INSTALL PACKAGE TRAY TRIM
20.
21. INSTALL REAR SEAT (See page BD-105)
22.
INSTALL DOOR SCUFF PLATE
GLASS
Mmtmum hme p�ror to dr!Vmg I he veh1cle
1_5 hour�
5 r-ours
24 hours
B0-6 3