6. Manual transmission gear shift lever or automatic transmission selector lever 7. Power window switches 8. Power door lock switch 9. Auxiliary box 10. Parking brake lever 11. Hood lock release lever 12. Power rear view mirror control switch 2000 CELICA (OM20735U) WWW.MANUALS.WS...
Page 6
: For details, see “Service reminder indicators and warning buzzers” in Section 1- 5. ∗ 2 : If this light flashes, see “Automatic transmission” in Section 1- 6. ∗ 3 : If this light flashes, see “Cruise control” in Section 1- 6. 2000 CELICA (OM20735U) WWW.MANUALS.WS...
Vehicles with a power door lock system— made by a Toyota dealer using the key Both side doors and back door lock and To protect things locked in the glove box number.
Page 9
Both side doors and back door lock or door. Be careful not to lock your keys in unlock simultaneously. the vehicle. Vehicles with a power door lock sys- tem—The side doors cannot be locked if you leave the key in the ignition switch. 2000 CELICA (OM20735U) WWW.MANUALS.WS...
Page 10
Pushing the switch twice within 3 seconds unlocks both side doors and back door simultaneously. At this time, parking lights, side marker lights and tail lights flash twice. Unlocking operation 2000 CELICA (OM20735U) WWW.MANUALS.WS...
Page 11
You can use up to 4 wireless remote con- The “PANIC” switch is used to deter ve- trol transmitters for the same vehicle. hicle theft when you witness anyone at- Contact your Toyota dealer for detailed tempting to break into or damage your information. vehicle.
Page 12
“REPLACING TRANSMITTER BATTERY”. If you lose your transmitter, contact your Toyota dealer as soon as possible to avoid the possibility of theft, or an acci- dent. REPLACING TRANSMITTER BATTERY For replacement, use a CR2016 lithium battery or equivalent.
Page 13
Toyota dealer. If you lose your transmitter, contact your Toyota dealer as soon as possible to avoid the possibility of theft, or an acci- dent. (See “If you lose your wireless re- mote control transmitter”...
Use the switch on the driver’s side of the center console. Normal operation: The window moves as long as you hold the switch. To open: Lightly push down the switch. To close: Pull up the switch. 2000 CELICA (OM20735U) WWW.MANUALS.WS...
Page 15
The window moves as long as you hold the switch. To open: Push down the switch. To close: Pull up the switch. 2000 CELICA (OM20735U) WWW.MANUALS.WS...
Unat- vents exhaust gases from entering tended children become “Luggage stowage precautions” the vehicle. volved in serious accidents. Section 2 for precautions in loading lug- gage. 2000 CELICA (OM20735U) WWW.MANUALS.WS...
CAUTION occur. After inserting the support rod into the slot, make sure the rod supports the hood securely from falling down on to your head or body. 2000 CELICA (OM20735U) WWW.MANUALS.WS...
The indicator lamp goes off after driving neck if the cap is suddenly re- several times. If the indicator lamp does moved. not go off, contact your Toyota dealer as soon as possible. 2000 CELICA (OM20735U) WWW.MANUALS.WS...
43 seconds even after " Use only a genuine Toyota fuel tank the ignition switch is turned off. It stops cap for replacement. It has a built- working when either side door is opened.
Page 20
If the moon roof cannot be operated prop- sure it is safe to do so. erly, have it checked by your Toyota deal- 2000 CELICA (OM20735U) WWW.MANUALS.WS...
Page 21
Do not use wax, win- cleaner abrasive clean- er—these may damage the plastic resin moon roof. (See “Washing and waxing your Toyota” in Section 5.) z Do organic substances (gasoline, kerosene, benzine strong solvents), which may toxic or cause damage.
Page 34
The objects may interfere with the seat- lock mechanism or unexpect- edly push up the seat position ad- justing lever; the seat may suddenly move, causing the driver to lose control of the vehicle. 2000 CELICA (OM20735U) WWW.MANUALS.WS...
Page 35
Therefore, in the event of a frontal collision, the risk of personal injury may increase with increasing recline of the seat- back. 2000 CELICA (OM20735U) WWW.MANUALS.WS...
Page 36
The seat will slide forward. 2. Move the seat to the front- most posi- tion. After passengers are in, lift up the seat- back and return the seat until it locks. 2000 CELICA (OM20735U) WWW.MANUALS.WS...
Page 37
See “Lug- gage stowage precautions” in Section 2 CAUTION for precautions in loading luggage. The seat belt must be removed from the hanger when the seat belt is in use. 2000 CELICA (OM20735U) WWW.MANUALS.WS...
Page 38
WWW.MANUALS.WS Celica_U Seat belts— —Seat belt precautions Toyota strongly urges that the driver and Pregnant woman. Toyota recommends the " Avoid reclining the seatbacks too passengers in the vehicle be properly re- use of a seat belt. Ask your doctor for much.
Page 39
It also may normally, immediately contact your lock if you lean forward too quickly. A Toyota dealer. Do not use the seat slow, easy motion will allow the belt to until the seat belt is fixed. It cannot extend, and you can move around freely.
Page 40
If the belt does not retract smoothly, pull it out and check for kinks or twists. Then The seat belt must be removed from make sure it remains untwisted as it re- tracts. the tongue holder when the seat belt is in use. 2000 CELICA (OM20735U) WWW.MANUALS.WS...
Page 41
Please contact your local Toyota dealer so nally intended for. that the dealer can order the proper re- quired length for the extender. Bring the heaviest coat you expect to wear for prop- er measurement and selection of length.
Page 42
" If the seat belt does not function normally, immediately contact your Toyota dealer. Do not use the seat The driver and front passenger’s seat This indicator comes on when the igni- until the seat belt is fixed. It cannot belt pretensioners are designed to be tion key is turned to the “ON”...
Page 43
Repair made on or near the front The front seat belt pretensioners are con- fenders, front end structure or con- trolled by the airbag sensor assembly. The sole airbag sensor assembly consists of a saf- ing sensor and airbag sensor. 2000 CELICA (OM20735U) WWW.MANUALS.WS...
Page 44
Celica_U SRS driver and front passenger airbags This front seat belt pretensioner system In the following cases, contact your Toyota The SRS (Supplemental Restraint Sys- has a service reminder indicator to inform dealer as soon as possible: tem) airbags are designed to provide further protection for the driver and the driver of operating problems.
Page 45
(For If the severity of the impact is below the details, see “Service remainder indicators above threshold level, the SRS airbags and warning buzzers” in Section 1- 5.) may not deploy. 2000 CELICA (OM20735U) WWW.MANUALS.WS...
Page 46
Some examples are shown if it is involved in a low- speed frontal in the illustration. collision. 2000 CELICA (OM20735U) WWW.MANUALS.WS...
Page 47
5. Airbag module for driver not be hot. The airbags are designed to (airbag and inflator) inflate only once. The airbag sensor assembly consists of a safing sensor and center airbag sensor. 2000 CELICA (OM20735U) WWW.MANUALS.WS...
Page 48
“Seat belts—” in this section. 2000 CELICA (OM20735U) WWW.MANUALS.WS...
Page 49
It is dan- gerous if the side airbag inflates, and the impact could cause death or serious injury to the child. 2000 CELICA (OM20735U) WWW.MANUALS.WS...
Page 50
Likewise, the driver and front system in the rear seat. For instruc- passenger should not hold things in tions concerning the installation of their arms or on their knees. a child restraint system, see “Child restraint—” in this section. 2000 CELICA (OM20735U) WWW.MANUALS.WS...
Page 51
Modification of the suspension sys- z Modification of the front end struc- This SRS airbag system has a service In the following cases, contact your Toyota reminder indicator to inform the driver of dealer as soon as possible: ture "...
Page 52
The SRS side airbag on details, see “Service reminder indicators the passenger seat is activated even with and warning buzzers” in Section 1- 5.) no passenger in the front seat. Be sure to wear your seat belt properly. 2000 CELICA (OM20735U) WWW.MANUALS.WS...
Page 53
For the safety of all occupants, always The SRS side airbag system is controlled wear your seat belts properly. by the airbag sensor assembly. The airbag sensor assembly consists of a safing sen- sor and airbag sensor. 2000 CELICA (OM20735U) WWW.MANUALS.WS...
Page 54
The airbags are designed to inflate death or serious injury to the child. only once. instructions concerning installation of a child restraint sys- tem, see “Child restraint—” in this section. 2000 CELICA (OM20735U) WWW.MANUALS.WS...
Page 55
Such changes may disable the system or cause the side airbags to inflate acciden- tally, resulting in death or serious injury. Consult your Toyota dealer if you consider modifications of this " " Do not lean against the front door Do not attach a cup holder or any kind.
Page 56
Modification of the suspension sys- This side airbag system has In the following cases, contact your Toyota z Modification of the side structure of service reminder indicator to inform the dealer as soon as possible: driver of operating problems. If either of "...
Page 57
WWW.MANUALS.WS Celica_U Child restraint— —Child restraint precautions Toyota strongly urges the use of child " NOTICE Toyota strongly urges use of restraint systems children small proper child restraint system that enough to use them. Do not disconnect the battery cables conforms to the size of the child, before contacting your Toyota dealer.
Page 58
It is dan- gerous if the side airbag inflates, and the impact could cause death or serious injury to the child. 2000 CELICA (OM20735U) WWW.MANUALS.WS...
Page 59
Your vehicle has anchors for securing the top strap of a child restraint system. For instructions on how to use the anchor bracket, see “—Using a top strap” in this section. (B) Convertible seat 2000 CELICA (OM20735U) WWW.MANUALS.WS...
Page 60
Never put a rear- facing child re- straint system on the front passen- ger seat because the force of the rapid inflation of the front passen- ger airbag can cause death or seri- ous injury to the child. 2000 CELICA (OM20735U) WWW.MANUALS.WS...
Page 61
Contact your 1. Run the lap and shoulder belt through Toyota dealer immediately. Do not " Do not put a rear- facing child re- or around the infant seat following the use the seat until the seat belt is...
Page 62
To hold the infant seat securely, make it is secure. Follow all the installation sure the belt is in the lock mode before instructions provided by its manufac- letting the belt retract. turer. 2000 CELICA (OM20735U) WWW.MANUALS.WS...
Page 64
It is dan- gerous if the side airbag inflates, and the impact could cause death or serious injury to the child. 2000 CELICA (OM20735U) WWW.MANUALS.WS...
Page 65
2. Fully extend the shoulder belt to put it 3. While pressing convertible seat Toyota dealer immediately. Do not in the lock mode. When the belt is firmly against the seat cushion and use the seat until the seat belt is...
Page 66
Follow all the installation ger. instructions provided by its manufac- turer. 2000 CELICA (OM20735U) WWW.MANUALS.WS...
Page 67
Make sure the shoulder belt is correctly across the child’s shoulder and that the lap belt is positioned as low as possible on child’s hips. See “Seat belts” for de- tails. 2000 CELICA (OM20735U) WWW.MANUALS.WS...
Page 68
Contact your is positioned across the center of Toyota dealer immediately. Do not child’s shoulder. The belt should be use the seat until the seat belt is kept away from child’s neck, but fixed. not falling off child’s shoulder. Fail-...
Page 69
1. Find the label on the rear of the seat of a top strap. Anchor brackets are installed for each back carpet. Tear the slit next to the rear seat. label by hand. This symbol indicates the locations of user ready anchor brackets. 2000 CELICA (OM20735U) WWW.MANUALS.WS...
Page 70
Slide the back- plate of the flap under the and pulling it in different directions. carpet to cover the anchor bracket when it is not in use. 2000 CELICA (OM20735U) WWW.MANUALS.WS...
Page 71
Use a spray de- icer to free sure it is locked in position. personal death or injuries. the mirror. 2000 CELICA (OM20735U) WWW.MANUALS.WS...
Page 72
Both the driver and pas- clarity at this position. senger side rear view mirrors must Night driving—Lever at position 2 be extended and properly adjusted before driving. Remember that by reducing glare you also lose some rear view clarity. 2000 CELICA (OM20735U) WWW.MANUALS.WS...
Page 73
WWW.MANUALS.WS Celica_U Vanity mirrors To use the vanity mirror, swing down the sun visor and open the cover. 2000 CELICA (OM20735U) WWW.MANUALS.WS...
NOTICE To prevent the battery being dis- charged, do not leave the lights on for a long period when engine is not running. Type B 2000 CELICA (OM20735U) WWW.MANUALS.WS...
Page 77
You can flash the high beam headlights If the turn signal indicator lights (green with the knob turned to “OFF”. lights) on the instrument panel flash faster than normal, a front or rear turn signal bulb is burned out. 2000 CELICA (OM20735U) WWW.MANUALS.WS...
Always pull as far off the road as pos- sible. The turn signal light switch will not work when the emergency flashers are operat- ing. 2000 CELICA (OM20735U) WWW.MANUALS.WS...
“DOOR”—Turns the light on when either side door or the back door is opened. The light goes off when both side doors and back door are closed. 2000 CELICA (OM20735U) WWW.MANUALS.WS...
Page 80
“DOOR”—Turns the light on when either not opened. side door or the back door is opened. The light goes off when both side doors and back door are closed. 2000 CELICA (OM20735U) WWW.MANUALS.WS...
The key must be in the “ON” position. the light off. Lever position Speed setting Position 1 Intermittent Position 2 Slow Position 3 Fast For a single sweep of the windshield, push the lever up and release it. 2000 CELICA (OM20735U) WWW.MANUALS.WS...
(position 3 or 4). The knob automatically returns from these positions after you release it. For instructions on adding washer fluid, see “Adding washer fluid” in Section 7- 3. 2000 CELICA (OM20735U) WWW.MANUALS.WS...
An indicator light will illuminate to indicate the defogger is operating. Push the switch once again to turn the defogger off. The system will automatically shut off af- ter the defogger has operated about 15 minutes. 2000 CELICA (OM20735U) WWW.MANUALS.WS...
The indicator lamp goes off after driving several times. If the indicator lamp does not go off, contact your Toyota dealer as The gauge works when the ignition The gauge indicates the engine coolant soon as possible.
7100 rpm before it needle is not displayed, there may be a warms up. problem in the system. In this case, con- tact your Toyota dealer as soon as pos- sible. NOTICE z Do not remove the thermostat in the engine cooling system as this may cause the engine to overheat.
You can use one trip meter to calculate the fuel economy and the other to Stop and check. measure the distance on each trip. All trip meter data is cancelled if the elec- trical power source is disconnected. 2000 CELICA (OM20735U) WWW.MANUALS.WS...
Page 89
" When the brake fluid level is low... Have your vehicle checked your Take vehicle to Toyota dealer in the following cases: Toyota dealer. (type A) Key reminder Remove key. " The light does not come on even if the...
Page 90
Turn off the air conditioning, during the engine running. buzzer stops after about 4 to 8 seconds. blower, radio, etc., and drive directly to In this case, the brakes might be the nearest Toyota dealer or repair shop. (c) Front Passenger’s Seat Belt...
Page 91
If it comes on while you are driving in harder to control or skid during hard case c, have your vehicle checked/re- braking or braking on slippery road paired by your Toyota dealer as soon as surfaces. possible. 2000 CELICA (OM20735U)
Page 92
“ON” posi- circuit in need of repair. Have it tion, or the light remains on. checked by your Toyota dealer as soon as " possible. The light comes on or flashes while driving. (k) Automatic...
“LOCK” position and open the driver’s door, a buzzer will remind you to remove the key. “LOCK”—Engine is off and the steering wheel is locked. The key can be re- moved only at this position. 2000 CELICA (OM20735U) WWW.MANUALS.WS...
2: Stronger engine braking With the brake pedal depressed, shift while holding the lock release L: Maximum engine braking button (The ignition switch must be in “ON” position.) Shift while holding the lock release button in Shift normally 2000 CELICA (OM20735U) WWW.MANUALS.WS...
Page 96
Never put your foot on the accelera- For ways to decrease the vehicle speed, will automatically be on. tor pedal while shifting. see “Cruise control” in this section. 2000 CELICA (OM20735U) WWW.MANUALS.WS...
Page 97
“R” position. When towing a trailer, in order to main- tain engine braking efficiency, do not NOTICE use overdrive. Never shift into reverse while the ve- hicle is moving. 2000 CELICA (OM20735U) WWW.MANUALS.WS...
Page 98
Do not depress the accelerator ped- al while shifting the selector lever or before the transmission is com- pletely shifted to forward or reverse gear. z Do not race the engine and avoid spinning the wheels. 2000 CELICA (OM20735U) WWW.MANUALS.WS...
Page 99
(The ignition switch 2: Stronger engine braking must be in “ON” position.) L: Maximum engine braking Shift while holding the lock release button in Shift normally To select “M”, lean the selector lever leftward from “D”. 2000 CELICA (OM20735U) WWW.MANUALS.WS...
Page 100
If the engine is turned off when the over- drive is off and restarted, the overdrive will automatically be on. 2000 CELICA (OM20735U) WWW.MANUALS.WS...
Page 101
You can start from second gear by setting shift switch while vehicle stopped. This is useful for driving your vehicle on slippery (rainy, icy or snow- 1: Upshift switch (rear) covered) roads. 2: Downshift switch (front) 2000 CELICA (OM20735U) WWW.MANUALS.WS...
Page 102
Put the selector lever in the “D” Shift the selector lever into the “2” eration is needed when you are cruising position. Consult with your Toyota dealer position or push the transmission shift below the above downshifting speeds. as soon as possible.
Page 103
NOTICE use overdrive. With the selector lever in “L”, the trans- Never shift into reverse while the ve- mission is engaged in first gear. hicle is moving. 2000 CELICA (OM20735U) WWW.MANUALS.WS...
Page 104
Do not depress the accelerator ped- al while shifting the selector lever or before the transmission is com- pletely shifted to forward or reverse gear. z Do not race the engine and avoid spinning the wheels. 2000 CELICA (OM20735U) WWW.MANUALS.WS...
171 (106) skid. 6- speed gear km/h (mph) NOTICE (37) (58) Make sure the vehicle is completely (80) stopped before shifting into reverse. 163 (101) 208 (129) Type B 2000 CELICA (OM20735U) WWW.MANUALS.WS...
To avoid accidental cruise control en- transmission to use engine braking gagement, keep “CRUISE ON- to slow down. OFF” switch off when not using the cruise control. 2000 CELICA (OM20735U) WWW.MANUALS.WS...
Page 108
Toyota deal- the set speed. When you release it, the er at the earliest opportunity. vehicle will return to the speed set prior RESETTING TO A FASTER SPEED to the acceleration.
Page 109
If this is the case, contact your Toyota will not be applied because the cruise dealer and have your vehicle inspected. control is not cancelled. To decrease the...
Page 112
Reference —Some basics This section describes some of the basic TONE AND BALANCE features on Toyota audio systems. Some For details about your system’s tone and information may not pertain to your sys- balance controls, see the description of tem.
Page 113
Do not oil any part of the player and make sure it is removed before driv- do not insert anything other than cas- ing your Toyota through an automatic sette tapes into the slot, or the tape car wash. player may be damaged.
Page 114
WWW.MANUALS.WS Celica_U —Controls and features Details of specific buttons, controls, and features are described in the alphabetical listing that follows. 2000 CELICA (OM20735U) WWW.MANUALS.WS...
Page 115
“TAPE”; to stop the tape while it is re- winding, push reverse button After you turn the ignition to “LOCK”, you “TAPE”. will be able to eject a cassette or disc but you will not be able to reinsert it. 2000 CELICA (OM20735U) WWW.MANUALS.WS...
Page 116
If the malfunction is not rectified, take track and disc number currently being the knob to suit your preference. your vehicle to your Toyota dealer. played. Each time you push “CD”, the The display will show the range from system changes to the automatic changer.
Page 117
FM1·2 Push “FM1·2” to turn on the radio and select the FM band. “FM1” or “FM2” will appear on the display. This system allows you to set twelve FM stations, two for each button. 2000 CELICA (OM20735U) WWW.MANUALS.WS...
Page 118
This process will be continued until you of the next disc. To select a disc, push push the button again to turn off the re- “SCAN” again. player peat feature. scanned all the discs, it will stop scan- ning. 2000 CELICA (OM20735U) WWW.MANUALS.WS...
Page 119
TUNE (Tuning) the number of tracks you want to skip. If ST (Stereo reception) display Your Toyota has an electronic tuning radio you push the button ten times, the skip Your radio automatically changes to stereo (ETR). Turn the knob clockwise to step up feature will be turned off.
Page 120
(A wet type is recommended.) change constantly as your vehicle moves. 2000 CELICA (OM20735U) WWW.MANUALS.WS...
Page 121
On hot days, use the air conditioning to cool the vehicle interior before you listen to a disc. " Bumpy roads or other vibrations may make your compact disc player skip. 2000 CELICA (OM20735U) WWW.MANUALS.WS...
Page 122
Wipe in a straight line from the center to the edge of the disc (not in circles). Dry it with another soft, lint- free cloth. Do not use a conventional record cleaner or anti- static device. 2000 CELICA (OM20735U) WWW.MANUALS.WS...
WWW.MANUALS.WS Celica_U Controls 1. Temperature Selector 2. Air Intake Selector 3. Air Flow Selector 4. “A/C” Button (on some models) 5. Fan Speed Selector 2000 CELICA (OM20735U) WWW.MANUALS.WS...
Page 125
Turn the knob to select the vents used for air flow. 1. Panel—Air flows mainly from the in- strument panel vents. 2. Bi- level—Air flows from both the floor vents and the instrument panel vents. 3. Floor—Air flows mainly from the floor vents. 2000 CELICA (OM20735U) WWW.MANUALS.WS...
Page 126
If this happens, take your ve- hicle to a Toyota dealer for service. Air intake selector Move the lever to select the air source. 1. Recirculate—Recirculates the air inside the vehicle.
Celica_U Air flow selector settings Operating tips " To cool off your Toyota after it has been parked in the hot sun, drive with the windows open for a few minutes. This vents the hot air, allowing the air conditioning to cool the interior more quickly.
Page 128
Press the “A/C” button on for dehumidi- fied heating. Fan speed—Any setting except “OFF” " Temperature—Towards COLD Choose floor/windshield air flow to heat (blue zone) the vehicle interior while defrosting or Air intake—FRESH (outside air) defogging the windshield. Air flow—PANEL Air conditioning—OFF 2000 CELICA (OM20735U) WWW.MANUALS.WS...
This setting clears the windshield air flow. front view more quickly. " On humid days, do not blow cold air on the windshield—the difference be- tween the outside and inside tempera- tures could make the fogging worse. 2000 CELICA (OM20735U) WWW.MANUALS.WS...
Page 130
WWW.MANUALS.WS Celica_U You can change air flow direction by turn- ing the instrument panel vents. 2000 CELICA (OM20735U) WWW.MANUALS.WS...
For example, if the “:00” button is de- pressed when time between Use a Toyota genuine cigarette lighter or 1:01—1:29, the time will change to 1:00. equivalent for replacement. If the time is between 1:30—1:59, the time will change to 2:00.
To lock: Insert the master key and turn it clockwise. CAUTION To reduce the chance of injury in case of an accident or a sudden stop, always keep glove door closed while driving. Rear console 2000 CELICA (OM20735U) WWW.MANUALS.WS...
Do not place anything else on the always keep the auxiliary box closed cup holder, as such item may be while driving. thrown about in the compartment and possibly injure people in the vehicle during sudden braking or an accident. Front Rear 2000 CELICA (OM20735U) WWW.MANUALS.WS...
To prevent damage to the hook, avoid ers. hanging heavy loads on it. CAUTION Make sure the luggage cover is surely stowed. To avoid personal injury, keep the tie- down hooks stored under the carpet when not in use. 2000 CELICA (OM20735U) WWW.MANUALS.WS...
Fix the floor mat with locking placed on the floor carpet. If the floor clip into the hole in the floor carpet. slips and interferes with movement of the pedals during driv- ing, it may cause an accident. 2000 CELICA (OM20735U) WWW.MANUALS.WS...
To help prevent gas station mix- ups, your engine performance. to the future economy and long life of Toyota has a new smaller fuel tank open- your vehicle: Use of unleaded gasoline with an octane ing. The special nozzle on pumps with "...
Page 139
GASOLINES CONTAINING ALCOHOL knock, etc.), discontinue the use. Toyota recommends the use of gasolines If you use gasohol in your Toyota, be that meet the AAMA specification, if avail- z Take care not to spill gasohol dur- sure that it is unleaded, has an octane able, for improved driveability and emis- ing refueling.
Operation in foreign countries Three- way catalytic converter The fuel pump shut off system stops sup- If you plan to drive your Toyota in another country... plying fuel to the engine to minimize the risk of fuel leakage when the engine stalls First, comply with the vehicle registration or an airbag inflates upon collision.
Avoid inhaling the engine exhaust. flowing into the three- way catalytic sible. Remember, your Toyota dealer It contains carbon monoxide, which converter may cause it to overheat knows your vehicle and its three- is a colorless and odorless gas.
High tem- after driving at high speeds. perature exhaust gases also burn the oil used to lubricate the exhaust valve stems. 2000 CELICA (OM20735U) WWW.MANUALS.WS...
Also, the function will not be impaired. Therefore, it brake system warning light may come on. is essential that the oil level be checked regularly. Toyota recommends that the oil level be checked every time you refuel CAUTION the vehicle.
Page 144
This means that the stability and effectiveness of steering anti- lock brake system is in the self wheel operation even with the anti- check mode, and does not indicate a mal- lock brake system on. function. 2000 CELICA (OM20735U) WWW.MANUALS.WS...
Page 145
Driving with tire chains installed. " Driving over the steps such as the joints on the road " Driving on roads where the road surface is pitted or has other differ- ences in surface height. Type B 2000 CELICA (OM20735U) WWW.MANUALS.WS...
This is the primary identification number ing, and impair the driver’s control low, as close to the floor as pos- for your Toyota. It is used in registering of the vehicle. In an accident they sible. the ownership of your vehicle.
Page 148
WWW.MANUALS.WS Celica_U —Engine number The engine number is stamped on the engine block as shown. 1ZZ- FE engine The vehicle identification number (VIN) is also on the Certification Label. 2ZZ- GE engine 2000 CELICA (OM20735U) WWW.MANUALS.WS...
All season tires, however, do not have adequate traction performance compared with snow tires in heavy or loose snow. Also, all season tires fall short in accel- eration handling performance compared with summer tires in highway driving. 2000 CELICA (OM20735U) WWW.MANUALS.WS...
Page 150
" Do not use tires other than the manufacture’s designated tires, and never mix tires or wheels of the sizes different from the originals. 2000 CELICA (OM20735U) WWW.MANUALS.WS...
Page 151
..........How to save fuel and make your vehicle last longer, too ..2000 CELICA (OM20735U) WWW.MANUALS.WS...
If the engine stalls... the floor until driving off. Simply restart it, using the correct proce- dure given in normal starting. If the engine will not start... See “If your vehicle will not start—” in Section 4. 2000 CELICA (OM20735U) WWW.MANUALS.WS...
If you are not sure about “TOYOTA Long Life Coolant” or equivalent. Driving over 140 km/h (85 mph) may which oil to use, call your Toyota deal- See Section 7- 2 for details about coolant result in tire failure, loss of control er—he will be pleased to help.
Toyota Keep ice and snow from accumulating warranties do not apply to damage or under the fenders. malfunction caused by towing a trailer for...
Page 156
Gross Axle Weight Rating (GAWR) listed on the Certification Label. 2000 CELICA (OM20735U) WWW.MANUALS.WS...
Page 157
" Never tow a trailer without using a brakes that conform to any applica- " Toyota recommends that you do not safety chain securely attached to ble federal and state/provincial regu- tow a trailer with a new vehicle or a both the trailer and the vehicle.
Page 158
If not, turning. Have someone guide you when making a larger than normal turning install the rear view mirrors required backing to reduce the risk of an acci- radius with your vehicle. for towing purpose. dent. 2000 CELICA (OM20735U) WWW.MANUALS.WS...
Page 159
3. When the wheel blocks are in place, release your brakes slowly until the blocks absorb the load. 4. Apply the parking brake firmly. 5. Shift into first or reverse (manual) or “P” (automatic) and turn off the engine. 2000 CELICA (OM20735U) WWW.MANUALS.WS...
Maintain a moderate speed on high- Avoid jackrabbit starts. Get into high ways. The faster you drive, the greater gear as quickly as possible. the fuel consumption. By reducing your speed, you will cut down on fuel con- sumption. 2000 CELICA (OM20735U) WWW.MANUALS.WS...
Page 161
(For scheduled maintenance informa- tion, please refer to the “Scheduled Maintenance Guide” or “Owner’s Manu- al Supplement”). 2000 CELICA (OM20735U) WWW.MANUALS.WS...
Page 171
WWW.MANUALS.WS Celica_U If you lose your wireless remote control transmitter ... . . 2000 CELICA (OM20735U) WWW.MANUALS.WS...
Page 172
3. If the light is out, dim or goes out If the engine still will not start, it needs when the starter is cranked, the battery adjustment or repair. Call a Toyota dealer is discharged. You may try jump start- or qualified repair shop for assistance.
Page 173
Then get immediate medical on the batteries. (This helps reduce the attention. If possible, continue to explosion hazard, personal injuries and apply water with a sponge or cloth burns.) while en route to the medical office. 2000 CELICA (OM20735U) WWW.MANUALS.WS...
Page 174
The recommended connecting point is avoid serious injury, do not lean over shown in the following illustration: the battery or accidentally let the jumper cables or clamps touch any- thing except the correct battery termi- nals or the ground. 2000 CELICA (OM20735U) WWW.MANUALS.WS...
Page 175
If it is not, turn the ignition off. CAUTION To help avoid personal injury, keep the hood closed until there is no steam. Escaping steam or coolant is a sign of very high pressure. 2000 CELICA (OM20735U) WWW.MANUALS.WS...
Page 176
Park on a level system. You should have it checked as spot with firm ground. soon as possible at your Toyota dealer. CAUTION 2. Stop the engine and turn on your emergency flashers.
Page 177
Raise the vehicle only high enough your trunk or luggage compartment, and to remove and change the tire. its lighter weight helps to improve fuel economy and permits easier installation in case of a flat tire. 2000 CELICA (OM20735U) WWW.MANUALS.WS...
Page 178
CAUTION " The compact spare tire was de- signed especially for your Toyota. With a compact spare tire Do not use it on any other vehicle. " Do not exceed 80 km/h (50 mph)
Page 179
2. Twist the jack head clockwise and pull out the jack. 1. Turn the jack joint by hand until the jack becomes free. CAUTION When removing the jack, be careful not to injure your hands with the edge of the trim. 2000 CELICA (OM20735U) WWW.MANUALS.WS...
Page 180
Then secure the tire by repeating the above removal steps in reverse order to When storing the jack, be careful not prevent it from flying forward during a to injure your hands with the edge of collision or sudden braking. the trim. 2000 CELICA (OM20735U) WWW.MANUALS.WS...
Page 181
Be careful that the wrench does not slip off the nut. Do not remove the nuts yet—just unscrew them about one—half turn. Aluminum wheels 2000 CELICA (OM20735U) WWW.MANUALS.WS...
Page 182
As the jack touches the vehicle the tire and press it back over the other and begins to lift, double- check that it is bolts. properly positioned. CAUTION Never get under the vehicle when the vehicle supported jack alone. 2000 CELICA (OM20735U) WWW.MANUALS.WS...
Page 183
Make sure the wrench is securely engaged over the nut. Tighten each nut a little at a time in the order shown. Repeat the process until all the nuts are tight. 2000 CELICA (OM20735U) WWW.MANUALS.WS...
Page 184
2. Then tap it firmly with the side or heel the vehicle is lowered to the of your hand to snap it into place. ground. CAUTION Take due care in handling the orna- ment to avoid unexpected personal injury. Steel wheels Aluminum wheels 2000 CELICA (OM20735U) WWW.MANUALS.WS...
Page 185
11. Check the air pressure of the re- If towing is necessary, we recommend (a) Towing with wheel lift type truck— you to have it done by your Toyota placed tire. dealer or a commercial tow truck ser- Adjust the air pressure to the specification —From front...
Page 186
NOTICE Do not tow with the key removed or in the “LOCK” position when towing from the rear without a towing dolly. The steering lock mechanism is not strong enough hold front wheels straight. 2000 CELICA (OM20735U) WWW.MANUALS.WS...
Page 187
WWW.MANUALS.WS Celica_U —Emergency towing If towing is necessary, we recommend CAUTION you to have it done by your Toyota dealer or a commercial tow truck ser- Use extreme caution when towing ve- vice. hicles. Avoid sudden starts or erratic If towing service is not available in an...
Page 188
6. Start the engine. For your safety, 2. Pry up the cover with a flat- bladed keep the brake pedal depressed. screwdriver or equivalent. Be sure to have the system checked by your Toyota dealer as soon as possible. 2000 CELICA (OM20735U) WWW.MANUALS.WS...
Page 189
If you lose your keys remote control transmitter You can purchase a new key at your You can purchase a new wireless re- Toyota dealer if you can give them the mote control transmitter at your Toyota key number. dealer.
Page 191
......Washing and waxing your Toyota ......
Page 192
Now, it is up to you. Proper " High ambient temperatures can cause mud and debris without removing them. care of your Toyota can help ensure long- corrosion to those components of the The lower edge of doors, rocker panels term corrosion prevention.
Page 193
Hand- washing your Toyota Keep your vehicle in a well ventilated garage or a roofed place. Do not park Work in the shade and wait until the...
Page 194
Toyota through an automatic z Always remove the plastic bumpers car wash. if your vehicle is re- painted and 3.
Page 195
Use a cloth or sponge. As you are clean- ing, check the belts for excessive wear, fraying, or cuts. NOTICE z Do not use dye or bleach on the belts—it may weaken them. z Do not use the belts until they be- come dry. 2000 CELICA (OM20735U) WWW.MANUALS.WS...
Page 196
If you use cleaners or polishing z Never use organic substances such Toyota dealer will be pleased to answer them. agents, make sure their ingredients as benzine, alcohol or gasoline or do not include the substances men- alkaline or acid solutions for clean- tioned above.
Page 197
......For scheduled maintenance information, please refer to the separate “Sched- uled Maintenance Guide” or “Owner’s Manual Supplement”. 2000 CELICA (OM20735U) WWW.MANUALS.WS...
Page 198
Simple instructions for how to per- or if you prefer, your Toyota dealer will be dating this warranty. See “Owner’s War- form them are presented in Section 7.
Page 199
Booklet” or “Owner’s Manual Supple- should investigate the cause or take your check the nuts for looseness. Tighten ment” for the details. vehicle to your Toyota dealer or a quali- them if necessary. fied service shop immediately. It is recom- Tire rotation...
Page 200
Make sure the belt on a level spot. See Section 7- 2 for addi- webbing is not cut, frayed, worn or dam- tional information. aged. 2000 CELICA (OM20735U) WWW.MANUALS.WS...
Page 201
If you notice any of these clues, take your Check the level through the reservoir. The mance, sounds, and visual tip- offs that vehicle to your Toyota dealer as soon as level should be in the “HOT” or “COLD” indicate service is needed. Some impor- possible.
Use eye protection whenever you warranty coverage. Read separate compartment—the engine, radiator, work under your vehicle Toyota Warranty statement for details and exhaust manifold, power steering where you may be exposed to flying suggestions. fluid reservoir spark plug or falling material, fluid spray, etc.
Do not drive with the air cleaner need on performing do- it- yourself mainte- filter removed, or excessive engine nance. Remember all Toyota parts are de- z Remember that battery and ignition wear could result. Also backfiring signed in metric sizes, so your tools must...
Page 209
Baking soda Grease Conventional wrench (for terminal clamp bolts) Checking and replacing fuses Parts (if replacement is necessary): Fuse with same amperage rating as original Adding washer fluid Parts: Water Washer fluid containing antifreeze (for winter use) 2000 CELICA (OM20735U) WWW.MANUALS.WS...
Check the oil level on the dipstick correct. once again after adding the oil. 4. Pull the dipstick out and look at the oil level on the end. 2000 CELICA (OM20735U) WWW.MANUALS.WS...
Visually check the radiator, hoses, drain cock and water pump. If you can find no leak, have your Toyota dealer test the cap pressure and check for leaks in the cooling system. ILSAC certification mark 2000 CELICA (OM20735U) WWW.MANUALS.WS...
Checking brake fluid We recommend to use 50% solution for CAUTION your Toyota, to provide protection down to about -35 C (- 31 F). When it is extreme- To prevent burning yourself, do not ly cold, to provide protection down to...
If you spill the fluid, be sure to wash 10 C—30 C or 50 F—85 F) if the engine ing could be damaged. it off with water to prevent it from has not been run for about five hours. damaging the parts or paint. 2000 CELICA (OM20735U) WWW.MANUALS.WS...
If a tire frequently needs refilling, have it weight should be located so that the size and the vehicle capacity weight are checked by your Toyota dealer. vehicle is balanced. given in Section 8. They are also on the "...
When a tire is replaced, the wheel REPLACING YOUR TIRES The tires on your Toyota have built- in should always be balanced. tread wear indicators to help you know When replacing a tire, use only the An unbalanced wheel may affect vehicle when the tires need replacement.
Using tires on the wrong side of the vehicle will impair tire performance. See the following instructions for how to Turning direction rotate your tires correctly. Turning direction indicator (type A) With uni- directional tires Turning direction Turning direction indicator (type B) 2000 CELICA (OM20735U) WWW.MANUALS.WS...
Page 219
(with a spare tire of different wheel type as the installed tires) from the installed tires) To equalize tire wear and help extend tire life, Toyota recommends that you rotate your tires approximately every 12000 km (7500 miles). However, the most appropriate timing for tire rotation may vary according to your driving hab- its and road surface conditions.
If you need snow tires, select the same TIRE CHAIN SELECTION lower. size, construction and load capacity as Use the tire chains of correct size and " the original tires on your Toyota. Drive carefully avoiding bumps, type. holes, and sharp turns, which may Do not use tires other than those men- Use SAE Class “S”...
When replacing wheels, care should be " taken to ensure that the wheels are re- Use only the Toyota wheel nuts and placed by ones with the same load ca- wrench designed for your aluminum pacity, diameter, rim width, and offset.
Page 229
If possible, con- enough to keep the battery firmly in tinue to apply water with a sponge place. Overtightening may damage the or cloth while en route to the medi- battery case. cal office. 2000 CELICA (OM20735U) WWW.MANUALS.WS...
Page 230
WHITE battery checked NOTICE by your Toyota dealer. Never recharge the battery while the engine is running. Also, be sure all CLEAR or Have battery accessories are turned off. LIGHT checked by your YELLOW Toyota dealer. 2000 CELICA (OM20735U) WWW.MANUALS.WS...
Page 231
Section 8 of this manual for the functions controlled by each circuit. Type A fuses can be pulled out by the Type B Type D pull- out tool. The location of the pull- out tool is shown in the illustration. 2000 CELICA (OM20735U) WWW.MANUALS.WS...
Page 232
Follow the If the new fuse immediately blows out, manufacturer’s directions for how much to there is a problem with the electrical sys- mix with water. tem. Have your Toyota dealer correct it as soon as possible. 2000 CELICA (OM20735U) WWW.MANUALS.WS...
Page 233
A: H7 halogen bulbs — (low beam) B: HB3 halogen bulbs C: H3 halogen bulbs Headlights 9005 D: Wedge base bulbs (high beam) E: Single end bulbs — Front fog light F: Double end bulbs — Parking lights 2000 CELICA (OM20735U) WWW.MANUALS.WS...
Page 234
RIGHT SIDE HEADLIGHT: Remove the clips and take out the cover. In doing so, remove the washer hose from the notch on the cover. Remove and install the cover clips as shown in the following illustrations. Removing clip Installing clip 2000 CELICA (OM20735U) WWW.MANUALS.WS...
Page 235
To install a bulb, align the tabs of the Aiming is not necessary after replacing bulb with the cutout of the mounting hole. the bulb. When aiming adjustment is nec- essary, contact your Toyota dealer. 2000 CELICA (OM20735U) WWW.MANUALS.WS...
Page 236
Remove and install the cover clips as shown in the following illustrations. 5. RIGHT SIDE HEADLIGHT: Install the cover. NOTICE Always notch the washer hose before fastening it when installing the cover. This prevents washer hose damage. 2000 CELICA (OM20735U) WWW.MANUALS.WS...
Page 237
WWW.MANUALS.WS Celica_U Removing clip 2. Turn the bulb base counterclockwise 3. Pull the bulb out of the bulb base and install a new bulb. and remove it. If the connector is tight, wiggle it. Installing clip 2000 CELICA (OM20735U) WWW.MANUALS.WS...
Page 238
Aiming is not necessary after replacing NOTICE the bulb. When aiming adjustment is nec- essary, contact your Toyota dealer. Always notch the washer hose before fastening it when installing the cover. This prevents washer hose damage. 2000 CELICA (OM20735U)
Page 239
RIGHT SIDE PARKING LIGHT: Remove and install the clips as shown in the following illustrations. NOTICE Always notch the washer hose before fastening it when installing the cover. This prevents washer hose damage. Removing clip Installing clip 2000 CELICA (OM20735U) WWW.MANUALS.WS...
Page 240
—Front turn signal lights RIGHT SIDE FRONT TURN SIGNAL LIGHT: Remove and install the clips as shown in the following illustrations. NOTICE Always notch the washer hose before fastening it when installing the cover. This prevents washer hose damage. 2000 CELICA (OM20735U) WWW.MANUALS.WS...
Page 241
WWW.MANUALS.WS Celica_U —Rear turn signal, stop and tail, and back- up lights Removing clip Remove the cover. Installing clip 2000 CELICA (OM20735U) WWW.MANUALS.WS...
Page 242
WWW.MANUALS.WS Celica_U —License plate lights a: Stop and tail light Use a Phillips- head screwdriver. b: Back- up light c: Rear turn signal light Remove the cover. 2000 CELICA (OM20735U) WWW.MANUALS.WS...
Page 245
(occupants + luggage) Displacement, cm (cu. in.): mum engine performance kg (lb.) (725) 1ZZ- FE engine 1794 (109.5) ∗ Fuel tank capacity, L (gal., Imp. gal.): :Unladen vehicle 2ZZ- GE engine 1796 (109.6) 55 (14.5, 12.1) 2000 CELICA (OM20735U) WWW.MANUALS.WS...
Page 246
4.4 (4.8, 4.0) Without filter 4.2 (4.6, 3.8) Spark plug type: Coolant type: 1ZZ- FE engine Oil grade: “TOYOTA Long Life Coolant” or equiva- DENSO SK16R11 lent API grade SJ, “Energy- Conserving” or IFR5A11 ILSAC multigrade engine oil is recom-...
Page 247
Lining wear limit, mm (in.): Notice: Using automatic transmission 2.3 (2.4 2.0) 1.0 (0.04) fluid other than Toyota Genuine ATF Oil type: Parking brake adjustment when pulled with Type T- IV may cause deterioration in Gear oil API GL- 4 or GL- 5...
Page 248
Same as original tire Wheel nut torque, N·m (kgf·m, ft·Ibf): 103 (10.5, 76) NOTE: For a complete information on tires (e.g. replacing tires or replacing wheels), see “Checking tire pressure” through “Aluminum wheel precautions” in Section 7- 2. 2000 CELICA (OM20735U) WWW.MANUALS.WS...
Page 249
12. EFI NO.2 7.5 A: Multiport fuel injection system/sequential multiport fuel injec- 18. HORN 10 A: Horn 6. HEAD LH UPR 10 A: Left- hand head- tion system, emission control system light (high beam) 19. ALT- S 7.5 A: Charging system 2000 CELICA (OM20735U) WWW.MANUALS.WS...
Page 250
ABS- IG 5 A: Anti- lock brake sys- 47. HTR 50 A: Air conditioning system washer, rear window wiper and washer 48. DEF 30 A: Rear window defogger 31. OBD 7.5 A: On- board diagnosis sys- FAN RLY 5 A: Electric cooling fans 2000 CELICA (OM20735U) WWW.MANUALS.WS...
Page 253
Transportation, Wash- quality grading. addition to notifying Toyota Motor ington, D.C. 20590. You can also Your Toyota dealer will help answer any Sales, U.S.A., Inc. obtain other information about mo- questions you may have as you read this (Toll- free: 1- 800- 331- 4331).
Page 254
Warning: The traction grade assigned to tire failure. this tire is based on braking (straighta- head) traction tests and does not include cornering (turning) traction. 2000 CELICA (OM20735U) WWW.MANUALS.WS...