Viewing The Agent And Diagnostic Software Load Status Using Edm; Configuring Sntp Using Edm - Avaya 3500 Series Getting Started

Viewing the agent and diagnostic software load status using EDM

Use this procedure to display the currently saved and operational software status for agent and
diagnostic loads for an individual switch.
Procedure
1. In the navigation tree, double-click Edit.
2. In the Edit tree, click File System.
3. In the work area, click the Boot Image tab to view the software status.
Boot Image tab field descriptions
The following table describes the fields on the Boot Image tab.
Name
Unit # Software Image version
Unit # Software Image in flash
Unit # Diag Image version
Unit # Diag Image in flash

Configuring SNTP using EDM

Use this procedure to configure Simple Network Time Protocol (SNTP).
Procedure
1. In the navigation tree, click Edit.
2. In the Edit tree, click SNTP/Clock.
3. In the work area, click the Simple Network Time Protocol tab.
4. In the PrimaryServerInetAddressType section, click a radio button.
5. In the PrimaryServerInetAddress dialog box, type a value.
6. In the SecondaryServerInetAddressType section, click a radio button.
7. In the SecondaryServerInetAddress dialog box, type a value.
8. In the State section, click a radio button.
9. In the SyncInterval dialog box, type a value.
July 2015
Description
Indicates the operational agent software image for
the switch.
Indicates the saved agent software image for the
switch.
Indicates the operational diagnostic software image
for the switch.
Indicates the saved diagnostic software image for
the switch.
Comments on this document? infodev@avaya.com
Configuring the switch using EDM
Getting Started with Avaya ERS 3500 Series
131