Chapter 7: Software Considerations; Operational Modes - Avaya 8800 Planning And Engineering

Ethernet routing switch, network design
Table of Contents

Advertisement

Chapter 7: Software considerations

The software you install, in conjunction with the hardware present in the chassis and the operation mode,
determine the features available on the switch. Use this section to help you determine which modes to use.
Navigation

Operational modes

Operational modes
With Release 7.0 and later, the Avaya Ethernet Routing Switch 8800/8600 operates in R mode
only. You cannot configure the switch to run in M mode.
Similarly, enhanced operational mode configuration is not applicable as the system always
operates in enhanced mode.
R mode supports up to 256 000 IP routes, 64 000 MAC entries, and 32 000 Address Routing
Protocol (ARP) entries. This mode supports R and RS modules only.
With Software Release 7.0 and later, R and RS modules support up to 128 MLT groups and
up to eight ECMP routing paths.
Release 5.0 and later supports up to 4000 VLANs with a default of 1972. VLAN scaling is
reduced if you use multicast MAC filters.
Planning and Engineering — Network Design
on page 53
November 2010
53

Advertisement

Table of Contents
loading

This manual is also suitable for:

8600

Table of Contents