Ford 2003 Mustang Workshop Manual page 1774

Hide thumbs Also See for 2003 Mustang:

Table of Contents

CAUTION: Do not scratch the cylinder walls or crankshaft journals with the

connecting rod.

NOTE: Before removing pistons, inspect the top of the cylinder bores. If necessary, remove the

ridge or carbon deposits from each cylinder using a cylinder ridge reamer following

manufacturer's instructions.

Using the special tool, push pistons number 1 and 6 through the top of the cylinder block.

64. To remove pistons 3 and 5, 4 and 7, 2 and 8, turn crankshaft 90 degrees and repeat the

previous two steps.

65. Remove the side main bearing cap bolts.

Show Quick Links

Table of Contents