Removing The Brake Disc Of The Front Brake; Installing The Brake Disc Of The Front Brake; Rear Wheel; Removing Rear Wheel - KTM 2014 690 SMC R EU Repair Manual

12 WHEELS
12.6.3

Removing the brake disc of the front brake

12.6.4

Installing the brake disc of the front brake

12.7

Rear wheel

12.7.1

Removing rear wheel

–
Take the motorcycle off of the front wheel stand. (
–
Pull the front wheel brake and push down hard on the fork several times to align
the fork legs.
–
Tighten screws
Guideline
Screw, fork stub
101999-10
Finishing work
–
Take the motorcycle off of the rear wheel stand. (
Preparatory work
–
Raise the motorcycle with the rear wheel stand. (
–
Raise the motorcycle with the front wheel stand. (
–
Remove front wheel. (
Main work
–
Remove screws
402044-10
Main work
–
Clean the contact surface of the brake disc.
–
Position the brake disc with the ABS sensor wheel.
The lettering on the ABS sensor wheel is located on the outside.
–
Mount and tighten screws
Guideline
Screw, front brake disc
402044-10
Finishing work
–
Install the front wheel. (
–
Take the motorcycle off of the rear wheel stand. (
Preparatory work
–
Raise the motorcycle with the rear wheel stand. (
Main work
–
Press the brake caliper by hand on to the brake disc in order to press back the
brake piston.
–
Remove screw
–
Remove nut
102000-10

.
p. 72)

. Take off the brake disc with the ABS sensor wheel.

.
M6
p. 73)
 and pull wheel speed sensor

. Remove chain adjuster
p. 11)
M8 15 Nm
(11.1 lbf ft)
p. 10)
p. 10)
p. 10)
14 Nm Loctite
(10.3 lbf ft)
p. 10)
p. 10)
 out of the hole.

.
74
® 243™