Setting Engine To Top Dead Center; Mounting The Water Pump Cover; Installing Piston - KTM 2014 690 SMC R EU Repair Manual

16 ENGINE

16.5.18 Setting engine to top dead center

16.5.19 Mounting the water pump cover

16.5.20 Installing piston

–
Set the crankshaft to top dead center and lock it with the special tool
Engine blocking screw (77329010000) (
305560-10
–
Mount form washer
305558-11
–
Mount water pump impeller
–
Mount and tighten screw
Guideline
Screw, water pump
impeller
–
Lay on the water pump cover seal
305559-10
–
Position the water pump cover.
–
Mount and tighten screws
Guideline
Screw, water pump cover
305556-11
–
Shift the joint of the piston rings by 120°.
–
Push the oiled piston into the special tool.
Piston assembly ring (75029015102) (
302600-10
p. 237)

.

.

.
M6x15

.

.
M6x30
p. 233)

.
Loctite ® 243™
10 Nm
(7.4 lbf ft)
10 Nm (7.4 lbf ft)
164