Removing The Front Brake Disc; Installing The Front Brake Disc; Rear Wheel; Removing The Rear Wheel - KTM 450 EXC EU 2013 Repair Manual

14
WHEELS
14.5.3 Relloyilli the front brake disc
14.5.4 InSlallina the front brake disc
14.6
Rear
whl.1
14.6.1 Relloyilli the rear wheel
- Position the front wheel and insert the wheel spindle.
, / The brake linings are correctly positioned.
- Mount and tighten screw .
Guideline
Screw, front wheel spindle M24x1.5 45 Nm
(33.2 Ibf tt)
104
- Activate the hand brake lever multiple times until the brake linings are in contact
with the brake disc.
- Remove the motorcycle from the litt stand. ( .. p. 12)
- Pull the front wheel brake and push down hard on the fork several times to align
the fork legs.
- Fully tighten screw
Guideline
I
Screw, fork stub
PreparalolY work
I
M8
- Raise the motorcycle with the litt stand. ( .. p. 12)
- Remove the front wheel.
('r
p. 103)
Main work
- Remove screws . Take off the brake disc.
Main work
- Clean the contact surface of the brake disc.
115
Nm
~11.1
Ibf tt)
- Position the brake disc with the label facing outward. Mount and tighten screws
Guideline
Screw, front brake disc M6
Finishing work
- Install the front wheel. ( .. p. 103)
PreparalolY work
14
Nm
(10.3 Ibf It)
- Raise the motorcycle with the litt stand. ( .. p. 12)
Loctile- 243""