15
LIGHTING SYSTEM, INSTRUMENTS
15.5
Installing the headlight mask with the headlight
15.6
Changing the parking light bulb
Note
Damage to reflector Reduced brightness.
–
Grease on the lamp will evaporate due to the heat and be deposited on the reflector. Clean the lamp and keep it free of grease
before mounting.
Main work
–
Connect the connectors of headlight
–
Check lighting function.
102026-11
–
Remove the cloth from the fender and position the headlight mask.
Holding lugs
102027-10
–
Position groove
102028-10
–
Position brake line guides
Guideline
Screw, headlight mask
102025-11
Finishing work
–
Check the headlight setting. (
Preparatory work
–
Switch off all power consumers and switch off the engine.
–
Remove the headlight mask with the headlight. (
and turn signal lights
reach into the headlight mask.
on counterpiece
.
. Mount and tighten screws
p. 101)
.
.
M5
5 Nm (3.7 lbf ft)
p. 101)
102