KTM 2014 690 SMC R EU Repair Manual page 25

6 FORK, TRIPLE CLAMP
–
Heat up the outer tube in area
Guideline
50 °C (122 °F)
–
Slide the outer tube onto the inner tube.
–
Hold the lower sliding bushing with the longer side of the special tool.
Mounting tool (T14040S) (
–
Push the sliding bushing all the way into the outer tube.
201324-10
–
Position the support ring.
–
Hold the seal ring with the shorter side of the special tool.
Mounting tool (T14040S) (
–
Push the seal ring and support ring all the way into the outer tube.
201325-10
–
Mount lock ring
Info
The lock ring must engage audibly.
200656-13
–
Install dust boot
200655-13
–
Assemble related individual components accordingly.
Info
Compression damping side: cartridge with additional oil holes
adjuster, axle clamp marked L.
Rebound damping side: cartridge without additional oil holes, red adjuster,
axle clamp marked R.
202316-10
–
Mount cartridge.
202315-10

of the lower sliding bushing.
p. 240)
p. 240)

.

.
23

, white