Removing The Brake Disc Of The Front Brake; Installing The Brake Disc Of The Front Brake; Rear Wheel; Removing Rear Wheel - KTM 2011 690 SMC EU Repair Manual

12 WHEELS
12.6.3

Removing the brake disc of the front brake

12.6.4

Installing the brake disc of the front brake

12.7

Rear wheel

12.7.1

Removing rear wheel

Preparatory work
–
Raise the motorcycle with the rear wheel stand. (
–
Raise the motorcycle with the front wheel stand. (
–
Remove front wheel. (
Main work
–
Remove screws
306859-10
Main work
–
Clean the contact surface of the brake disc.
–
Position the brake disc with the label facing outward. Mount and tighten screws
Guideline
Screw, front brake disc
306859-10
Finishing work
–
Install the front wheel. (
–
Take the motorcycle off of the rear wheel stand. (
Preparatory work
–
Raise the motorcycle with the rear wheel stand. (
Main work
–
Press the brake caliper by hand on to the brake disc in order to press back the
brake piston.
–
Remove nut
–
Holding the rear wheel, withdraw the wheel spindle
100267-10
–
Push the rear wheel forwards as far as possible and take the chain off the rear
sprocket.
Warning
Danger of accidents Reduced braking effect caused by damaged brake
discs.
–
–
Take the rear wheel out of the swing arm.
600627-01
Info
Do not operate the foot brake when the rear wheel is removed.
p. 70)
. Take off the brake disc.
1
M6
p. 71)
. Remove chain adjuster
1
Always lay the wheel down in such a way that the brake discs are not
damaged.
p. 10)
p. 10)
14 Nm Loctite
(10.3 lbf ft)
p. 10)
p. 10)
.
2
.
3
72
.
1
® 243™