9
EXHAUST
9.1
Removing the manifold
Warning
Danger of burns The exhaust system gets very hot when the vehicle is driven.
–
Allow the exhaust system to cool down. Do not touch hot components.
Preparatory work
–
Remove the seat. (
–
Take off the side cover. (
Main work
–
Remove cable binders
–
Push the cable to the right. Disconnect plug-in connector
–
Feed out the cable of the lambda sensor.
G00811-10
–
Remove screws
–
Remove the exhaust heat shield.
G00812-10
–
Remove nuts
Info
Do not misplace the spacer.
G00813-10
–
Loosen screw
G00814-10
–
Remove screw
–
Take off the manifold.
G00815-10
p. 61)
p. 62)
.
.
of the manifold.
.
.
53
of the lambda sensor.