Disassembling The Main Shaft - KTM 2014 690 SMC R EU Repair Manual

16 ENGINE

16.4.34 Disassembling the main shaft

–
Fix the main shaft in the vise with the geared end facing downward.
Guideline
Use soft jaws.
–

Remove stop disk and second-gear fixed gear
–
Remove the sixth-gear idler gear
–
Remove the split needle bearing
–

Remove lock ring .
Info
Open the lock ring with a screwdriver and twist it off the transmission shaft with pliers.
–
Remove the third/fourth-gear sliding gear
–

Remove lock ring .
–

Remove stop disk and fifth-gear idler gear
–
Remove bearing bush 


.
 
and stop disk

.

.
.
.
.
147
306232-10