16
ENGINE
–
Check the internal rotor and external rotor of oil pumps
»
If there is damage or wear:
–
Change the oil pumps.
–
Check oil pump shafts
»
If there is damage or wear:
–
Change the oil pump shaft.
–
Check both oil pump covers for damage and wear.
»
If there is damage or wear:
–
Change the oil pump cover.
16.4.17 Replacing autodecompressor
»
If the measured value does not meet specifications:
–
for damage and wear.
–
Take the lock ring
300107-10
–
Pull the autodecompression shaft
300108-10
Change the oil pump and, if necessary, the engine case.
for damage and wear.
off the autodecompression shaft and dispose of it.
from the camshaft.
135
305661-10