KTM 2014 690 SMC R EU Repair Manual page 27

6 FORK, TRIPLE CLAMP
–
Push the outer tube upward.
–
Clamp the fork in the area of the lower triple clamp.
Clamping stand (T1403S) (
–
Lubricate the O-ring of the Preload Adjuster.
Lubricant (T511) (
–
Screw on the Preload Adjuster and tighten.
Guideline
202321-10
Screw cover on outer tube
Pin wrench (T103) (
–
Mount adjuster
Guideline
Adapter
Info
Compression damping side: white adjuster, axle clamp marked L.
Rebound damping side: red adjuster, axle clamp marked R.
202322-10
Alternative 1
–
Turn the adjusting screw of rebound damping
compression damping
–
Turn back counterclockwise by the number of clicks corresponding to the fork
leg type.
Guideline
Rebound damping
Comfort
Standard
202323-10
Sport
Full payload
Compression damping
Comfort
Standard
Sport
Full payload
–
Turn spring preload
–
Turn back counterclockwise by the number of turns corresponding to the fork
leg type.
Guideline
Spring preload - Preload Adjuster
Comfort
Standard
Sport
Full payload
p. 240)
p. 226)
p. 237)

; mount and tighten the screw.

clockwise as far as possible.
 clockwise all the way.
M47x1.5 40 Nm
(29.5 lbf ft)
M4x0.5 1.5 Nm
(1.11 lbf ft)

and the adjusting screw of
20 clicks
15 clicks
10 clicks
10 clicks
20 clicks
15 clicks
10 clicks
10 clicks
2 turns
5 turns
5 turns
8 turns
25