KTM 2014 690 SMC R EU Repair Manual page 100

14 BRAKE SYSTEM
–
Open the bleeder screw again until brake fluid stops emerging.
Info
This prevents overfilling of the brake fluid reservoir.
–
Tighten the bleeder screw. Remove the hose of the bleeder bottle. Mount the pro-
tection cap.
–
Disconnect the bleeding device. Remove the bleeder cover.
–
Add brake fluid to the MAX mark
Brake fluid DOT 4 / DOT 5.1 (
–
Mount the screw cap with the washer and membrane.
Info
Clean up overflowed or spilt brake fluid immediately with water.
G00808-11

.
p. 224)
98